ISV where ??
07-30-2002, 01:06 PM
#1
Advanced
Thread Starter
Join Date: Jul 2002
Location: Hamburg, Germany
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
ISV where ??
Hello I read the topics about idel problems with a lightwightflywheel and "upgrade the isv".....
now i have a rs flywheel
and sometimes the engine stall (when it is not cold and not really warm .-)) )
so i want to modify the ISV by myself :-)) but where is it ???? :-)
thx for your help
and greetings from hamburg
christian
now i have a rs flywheel
and sometimes the engine stall (when it is not cold and not really warm .-)) )
so i want to modify the ISV by myself :-)) but where is it ???? :-)
thx for your help
and greetings from hamburg
christian
07-30-2002, 01:33 PM
#2
Instructor
Join Date: Mar 2002
Location: geneva switzerland
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Hi Christian!!
The ISV (idle stabilisation valve) is just on top of your air intake manifold in the middle of it, where the air intake throttle body sits, just on the left side of it. That for the location.
As for the stalling I had the same problem with my engine, thus having also a LWF from a RS engine. Was getting on my nerves so I went to my specialist who said I have to chip the car with a new Chip Programm. I said Ok it cost me 800SFR about 550Euros and now it works fine, at least most of the time.
Hope this helps, Schöne Grüsse nach Deutschland,THOMAS
P.S. Ich hoffe dein Problem wird bald gelöst, Rufe mal RUF ann (lustig nicht??), die wissen was zu tun ist und können dir sicher helfen!Kann mir nicht vorstellen, dass ein RUF chip teurer ist als einer von FVD oder Techart. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
The ISV (idle stabilisation valve) is just on top of your air intake manifold in the middle of it, where the air intake throttle body sits, just on the left side of it. That for the location.
As for the stalling I had the same problem with my engine, thus having also a LWF from a RS engine. Was getting on my nerves so I went to my specialist who said I have to chip the car with a new Chip Programm. I said Ok it cost me 800SFR about 550Euros and now it works fine, at least most of the time.
Hope this helps, Schöne Grüsse nach Deutschland,THOMAS
P.S. Ich hoffe dein Problem wird bald gelöst, Rufe mal RUF ann (lustig nicht??), die wissen was zu tun ist und können dir sicher helfen!Kann mir nicht vorstellen, dass ein RUF chip teurer ist als einer von FVD oder Techart. <img src="graemlins/wave.gif" border="0" alt="[byebye]" />
07-30-2002, 01:37 PM
#3
Advanced
Thread Starter
Join Date: Jul 2002
Location: Hamburg, Germany
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
<img src="graemlins/jumper.gif" border="0" alt="[jumper]" /> Thx for your help :-))
i will check it tomorrow evening
p.s. klasse werde da mal anrufen bei ruf... danke für den tipp !!!!!
Gruss Christian
i will check it tomorrow evening
p.s. klasse werde da mal anrufen bei ruf... danke für den tipp !!!!!
Gruss Christian