964 Tool kit (I'm bored...)
#1
Rennlist Member
Thread Starter
964 Tool kit (I'm bored...)
Here goes...OK - I think, given that it's a Friday, I can post a slightly silly topic...though do feel free to tell me if I've gone too far this time!
I found a nice picture of a 964 toolkit
<img src="http://boards.rennlist.com/upload/964toolkit130603.jpg" alt=" - " />
I looked for one, because I thought mine was in some way incomplete or not original, bearing in mind there seemed to be no obvious way of getting all the tools to fit.
My question is, therefore, how are we supposed to fit 17 tools into 9 compartments of different sizes?!!! My guess is that each and every one of us has sorted them differently, yet Porsche must have had 1 way of doing it! ("A place for everything, and everything in its place")
BMW, IMHO, do it much better...
<img src="http://boards.rennlist.com/upload/m3toolkit.jpg" alt=" - " />...even if there aren't as many tools, at least I don't have to unpack the boot to get to them.
I found a nice picture of a 964 toolkit
<img src="http://boards.rennlist.com/upload/964toolkit130603.jpg" alt=" - " />
I looked for one, because I thought mine was in some way incomplete or not original, bearing in mind there seemed to be no obvious way of getting all the tools to fit.
My question is, therefore, how are we supposed to fit 17 tools into 9 compartments of different sizes?!!! My guess is that each and every one of us has sorted them differently, yet Porsche must have had 1 way of doing it! ("A place for everything, and everything in its place")
BMW, IMHO, do it much better...
<img src="http://boards.rennlist.com/upload/m3toolkit.jpg" alt=" - " />...even if there aren't as many tools, at least I don't have to unpack the boot to get to them.
#2
Three Wheelin'
OK- since you brought up the subject of the toolkit, now is a good time for me to ask a question. Do you know (or anyone else) what the tool to remove the small black cap that covers the wheel lock looks like and where I can get one? I have the 17 inch turbo cup rims, and the front caps I can remove with my fingers or maybe carefully pop off with a screw driver, but the rear caps are too deep in the wheel.
I believe there is a specific tool to remove these caps, that I would imagine probably looks like a bent (90 degrees) screw driver, but I don't have one so I don't know what it looks like.
If I try to use a screwdriver on the rears, it may make a mark on the wheel by scratching it- its an ackward angle to get in there...
I believe there is a specific tool to remove these caps, that I would imagine probably looks like a bent (90 degrees) screw driver, but I don't have one so I don't know what it looks like.
If I try to use a screwdriver on the rears, it may make a mark on the wheel by scratching it- its an ackward angle to get in there...
#3
Three Wheelin'
Rob
Firstly, this is a perfectly reasonable 'Bored Friday' topic!
Secondly, reference the question, I havent got a clue!
Thirdly, I'm so bored and it's so hot that I'm leaving now to drive up to North Norfolk to examine a 50 foot beached Sperm Whale! <img border="0" title="" alt="[Eek!]" src="eek.gif" />
Over and out!
Piers
Firstly, this is a perfectly reasonable 'Bored Friday' topic!
Secondly, reference the question, I havent got a clue!
Thirdly, I'm so bored and it's so hot that I'm leaving now to drive up to North Norfolk to examine a 50 foot beached Sperm Whale! <img border="0" title="" alt="[Eek!]" src="eek.gif" />
Over and out!
Piers
#6
Andrew,
Did you get a chance to see some of the responses that you received when you were looking for the same information on the cap removal tool in a <a href="http://forums.rennlist.com/cgi-bin/rennforums/ultimatebb.cgi?ubb=get_topic&f=20&t=000536" target="_blank"> previous post</a> a few months ago?
Tim
Did you get a chance to see some of the responses that you received when you were looking for the same information on the cap removal tool in a <a href="http://forums.rennlist.com/cgi-bin/rennforums/ultimatebb.cgi?ubb=get_topic&f=20&t=000536" target="_blank"> previous post</a> a few months ago?
Tim
#7
Addict
Rennlist Member
Rennlist Member
From <a href="http://www.msroadrace.com" target="_blank">MSRoadRace.</a> Good Friday topic!
<img src="http://www.msroadrace.com/TechStuff/TechIllustrations/964/0Accessories/ToolKitJack0-01-00.jpg" alt=" - " />
<img src="http://www.msroadrace.com/TechStuff/TechIllustrations/964/0Accessories/ToolKitJack0-01-00.jpg" alt=" - " />
Trending Topics
#8
Super Guru
Rennlist Member
Rennlist Member
</font><blockquote><font size="1" face="Verdana,Tahoma,Helvetica">quote:</font><hr /><font size="2" face="Verdana,Tahoma,Helvetica">Originally posted by tchanson:
<strong>Andrew,
Did you get a chance to see some of the responses that you received when you were looking for the same information on the cap removal tool in a <a href="http://forums.rennlist.com/cgi-bin/rennforums/ultimatebb.cgi?ubb=get_topic&f=20&t=000536" target="_blank"> previous post</a> a few months ago?
Tim</strong></font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Helvetica">The picture Tim took the trouble to post does answer your question (if your wheel lock covers are original equipment).
<strong>Andrew,
Did you get a chance to see some of the responses that you received when you were looking for the same information on the cap removal tool in a <a href="http://forums.rennlist.com/cgi-bin/rennforums/ultimatebb.cgi?ubb=get_topic&f=20&t=000536" target="_blank"> previous post</a> a few months ago?
Tim</strong></font><hr /></blockquote><font size="2" face="Verdana,Tahoma,Helvetica">The picture Tim took the trouble to post does answer your question (if your wheel lock covers are original equipment).
#10
Three Wheelin'
Oops- thanks guys- I must have been busy and didn't check the replies to my original question- the question must have moved off the first page, and I didn't notice it was ever answered. Thanks, and yes item C in the picture tim posted back in March is exactly what I'm looking for. I may try the coat hanger trick first... Thanks, and thanks for the picture Tim-
Andrew
Andrew
#11
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
The jack crank handle and the wheelbrace fit along inside the area which forms the rear of the bumper, sort of around the jack.
No matter how much you fiddle, you won't get everything to fit snugly.
Or so I thought until, one day, it just all 'fell into place'!
Everything just fitted together so well - the rubber buffers seemed to be perfectly positioned and evrything just 'clicked'.
Needless to say, I've since forgotten how exactly I achieved this!
No matter how much you fiddle, you won't get everything to fit snugly.
Or so I thought until, one day, it just all 'fell into place'!
Everything just fitted together so well - the rubber buffers seemed to be perfectly positioned and evrything just 'clicked'.
Needless to say, I've since forgotten how exactly I achieved this!
#12
Burning Brakes
Actually I find that the wheel lock key is perfect for removing the plastic cap.
just slide it into the wheel turn it so the teeth of the key are facing the cap and then a sharp pull and catch the cap.
if you do it wrong you tear the side of the cap !!!!
have fun.
just slide it into the wheel turn it so the teeth of the key are facing the cap and then a sharp pull and catch the cap.
if you do it wrong you tear the side of the cap !!!!
have fun.
#13
Race Car
OMG!! ...pictures of COMPLETE tool kits!
...I need a towel!! <img border="0" alt="[hiha]" title="" src="graemlins/roflmao.gif" />
I was thrilled to figure out that the tool kit that came with my 964 was complete...first one out of FOUR Porsches I've owned.
I did go to use the manual window allen socket and the allen would turn inside the socket, redering it USELESS. <img border="0" alt="[grrrrrrr]" title="" src="graemlins/cussing.gif" />
SO, I ordered a new one from Porsche and all was okay...I needed it while the car was disassembled for it's paint job and had NO battery power.
...oh yeah, the sunroof handle worked like a champ too!
...I need a towel!! <img border="0" alt="[hiha]" title="" src="graemlins/roflmao.gif" />
I was thrilled to figure out that the tool kit that came with my 964 was complete...first one out of FOUR Porsches I've owned.
I did go to use the manual window allen socket and the allen would turn inside the socket, redering it USELESS. <img border="0" alt="[grrrrrrr]" title="" src="graemlins/cussing.gif" />
SO, I ordered a new one from Porsche and all was okay...I needed it while the car was disassembled for it's paint job and had NO battery power.
...oh yeah, the sunroof handle worked like a champ too!
#14
Rennlist Member
Thread Starter
Glad you all liked the topic!
Joey B - great picture. Just what I wanted. Where did you get it from? (edit - oh,I see MSRoadRace!)
All - locking wheel nuts...When was the last time you heard of anyone having their wheels stolen? (this could,I suppose be because everyone uses locking wheel nuts...). I've taken mine off.
Joey B - great picture. Just what I wanted. Where did you get it from? (edit - oh,I see MSRoadRace!)
All - locking wheel nuts...When was the last time you heard of anyone having their wheels stolen? (this could,I suppose be because everyone uses locking wheel nuts...). I've taken mine off.
#15
Race Car
My locking lug nuts are ALWAYS the first thing to go!
I figure my car doesn't really sit anywhere where it would conveniently be put up on blocks...if MY wheels get stolen they shouldn't be that hard to find on eBay...and I swap them SO VERY OFTEN!!
...gee, wonder why?
I figure my car doesn't really sit anywhere where it would conveniently be put up on blocks...if MY wheels get stolen they shouldn't be that hard to find on eBay...and I swap them SO VERY OFTEN!!
...gee, wonder why?