The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#1786
#1787
Used set of 964 motor mounts. 55k miles in good overall condition. Replaced them with solid mounts and no longer have a need for these.
$130 for both shipped.
one R888 tire 275/35/ZR18 new never mounted $180 + shipping.
2 7X17 cup I wheels in decent condition. Clean paint $125 each plus shipping or $200 for the set plus shipping. These are both factory wheels although one is a .00 and the other is a .01.
All items shipped CONUS only.
$130 for both shipped.
one R888 tire 275/35/ZR18 new never mounted $180 + shipping.
2 7X17 cup I wheels in decent condition. Clean paint $125 each plus shipping or $200 for the set plus shipping. These are both factory wheels although one is a .00 and the other is a .01.
All items shipped CONUS only.
#1788
FS Porsche 964 Shifter Lever & Fork
As removed from my 93' 964 RS America Shift Lever & Fork. This is US stock not the short RS. $60 shipped to the conus. questions jfawsitt9@yahoo.com
#1790
VAC Motorsports floor mount adapters
Beautiful pieces, allows the seat to be mounted low but with a wide range of adjustments possible. Hugely popular in the BMW world. These have RS America Machined in but, as we all know, will fit any 964. $175 a pair or package deal, $300 for all 4. Will work with most aftermarket side mounts
#1791
My Loss... Your Gain
OK, long and short of it:
I wanted to add a fire extinguisher to my 964 and needed a bracket. Decided to go w/ Brey-Krause because I had their excellent bracket for my former Boxster.
Went to one of the premier BK distributors and bought the bracket – model R-2015 – TIG welded 304 Stainless Steel and allows full motion of the seat – driver or passenger seat.
Time commitments and the like had me delay it’s installation for 45 days.
When I finally got around to it, I discovered I had the wrong bracket for my car. I contacted the distributor and inquired about an exchange, hoping that they may, demonstrating good Cust. Svc., send me a return-shipping label and make the exchange seamless.
To my surprise, they replied that I would have to pay the return shipping (fair enough – my mistake not theirs) and also that since the purchase date was more than 30 days past, a 20% re-stocking fee would be tacked onto my ‘exchange’! I even called and spoke with the owner, who again, would not budge.
I could ‘eat’ the excess charges, get the right unit and go away with a sour taste in my mouth… Or, I could buy the proper unit (from another more accommodating vendor) and possibly benefit a fellow forum member in the process, leaving me with a slightly sweeter taste on my tongue.
This unit sells for $85 - $90 + S/H and includes all the necessary instructions and hardware to mount to the seat and for the extinguisher bracket it self. It is unused and never mounted and is still unopened in it’s original blister pac (the instruction sheet had been removed only, but will be included).
So if anyone would like a Brey-Krause model R-2015 (for non-powered seats) that accommodates an Averex 2.5lb. extinguisher bracket (others will work but might require drilling new holes), I will pass on the 20% restocking fee savings and sell it to you for $70 + actual shipping charges. Paypal preferred and will be shipped same day Paypal confirmation is received.
If you’ve always wanted to add an extinguisher to your car, (which is required for some forms of Track work), here’s your chance to get a top-of-the-line unit at 20% off the going rate.
PM me or email me at: 98699 hotmail com
Cheers!
I wanted to add a fire extinguisher to my 964 and needed a bracket. Decided to go w/ Brey-Krause because I had their excellent bracket for my former Boxster.
Went to one of the premier BK distributors and bought the bracket – model R-2015 – TIG welded 304 Stainless Steel and allows full motion of the seat – driver or passenger seat.
Time commitments and the like had me delay it’s installation for 45 days.
When I finally got around to it, I discovered I had the wrong bracket for my car. I contacted the distributor and inquired about an exchange, hoping that they may, demonstrating good Cust. Svc., send me a return-shipping label and make the exchange seamless.
To my surprise, they replied that I would have to pay the return shipping (fair enough – my mistake not theirs) and also that since the purchase date was more than 30 days past, a 20% re-stocking fee would be tacked onto my ‘exchange’! I even called and spoke with the owner, who again, would not budge.
I could ‘eat’ the excess charges, get the right unit and go away with a sour taste in my mouth… Or, I could buy the proper unit (from another more accommodating vendor) and possibly benefit a fellow forum member in the process, leaving me with a slightly sweeter taste on my tongue.
This unit sells for $85 - $90 + S/H and includes all the necessary instructions and hardware to mount to the seat and for the extinguisher bracket it self. It is unused and never mounted and is still unopened in it’s original blister pac (the instruction sheet had been removed only, but will be included).
So if anyone would like a Brey-Krause model R-2015 (for non-powered seats) that accommodates an Averex 2.5lb. extinguisher bracket (others will work but might require drilling new holes), I will pass on the 20% restocking fee savings and sell it to you for $70 + actual shipping charges. Paypal preferred and will be shipped same day Paypal confirmation is received.
If you’ve always wanted to add an extinguisher to your car, (which is required for some forms of Track work), here’s your chance to get a top-of-the-line unit at 20% off the going rate.
PM me or email me at: 98699 hotmail com
Cheers!
Last edited by Lil bastard; 11-07-2010 at 11:44 PM.
#1794
Have a set of 964 brake ducts posted here for sale:
https://rennlist.com/forums/for-sale...ake-ducts.html
Thanks!
https://rennlist.com/forums/for-sale...ake-ducts.html
Thanks!
#1796
RSA seats
Cloth power sport seats from 964 RSA. Small tear in vinyl backing of driver's seat, otherwise very good condition. Price is $1400. Pickup preferred but will drop off at my local UPS Store if buyer arranges everything with them.
#1800
Hello guys, I have some stuff for sale off of 964C2:
Roll Bar - Red: $300 <--- reduced!
WEVO Motor Mounts - Black poly: $250 shipped
Complete set of 18" race wheels: $1200
I also have a brand new set of RECARO SPG XL, never mounted. 2 seats, 2 sets of side mounts, 2 sets of sliders. All Recaro hardwares. $2000 OBO.
Trunk carpetings. Not sure if it is OEM or not. I think it is. Black and in good condition. No rip. $100 shipped??
Please email me for more pix.
Thanks for looking!
Jerry
Los Angeles
Roll Bar - Red: $300 <--- reduced!
WEVO Motor Mounts - Black poly: $250 shipped
Complete set of 18" race wheels: $1200
I also have a brand new set of RECARO SPG XL, never mounted. 2 seats, 2 sets of side mounts, 2 sets of sliders. All Recaro hardwares. $2000 OBO.
Trunk carpetings. Not sure if it is OEM or not. I think it is. Black and in good condition. No rip. $100 shipped??
Please email me for more pix.
Thanks for looking!
Jerry
Los Angeles
Last edited by junkart; 10-28-2010 at 11:44 AM.