The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#1771
Rennlist Member
1992 C4 original US springs - FREE
cleaning out
FREE set of C4 springs from my 92 C4 - orange dot on springs. Approx 50k miles on springs.
If no one takes them quick - they are going in the trash.
FREE set of C4 springs from my 92 C4 - orange dot on springs. Approx 50k miles on springs.
If no one takes them quick - they are going in the trash.
#1772
Rennlist Member
Does anyone have suggestions to help out this Rennlister?
#1773
Rennlist Member
Spoiler parts available - see my earlier post
The (interesting spoiler is gone, the I still have the motor drive, cover, and grill that goes underneath the pop up spoiler.
Darrell
The (interesting spoiler is gone, the I still have the motor drive, cover, and grill that goes underneath the pop up spoiler.
Darrell
#1774
Rennlist Member
Clutch release shaft G50? and Fabspeed airbox cover
Clutch release shaft upgrade kit - I bought this on ebay or RL a couple years ago when I was getting ready to replace my clutch, etc. It looked like the kit sold by Automotion and others for over $200. But, my shop said it would not fit, and when they showed me the original shaft and the (espensive) oem shaft kit - this shaft was longer. So, perhaps it is for a pre-964 G50? I paid $65 for it - you can have it for the same amount, shipped in US.
Fabspeed 964 air box cover - this one has some cracks in the corners and it didn't seal well, due to the cracks and the cheesy clamps. IMHO, these things are trashy construction and I can't believe the price charged for them. BUT, the sound is wonderful (HP gain is debatable). You can likely repair the cracks in the corners. I have one installed on my car now that is clamping/sealing adequately. $25 shipped?
Fabspeed 964 air box cover - this one has some cracks in the corners and it didn't seal well, due to the cracks and the cheesy clamps. IMHO, these things are trashy construction and I can't believe the price charged for them. BUT, the sound is wonderful (HP gain is debatable). You can likely repair the cracks in the corners. I have one installed on my car now that is clamping/sealing adequately. $25 shipped?
#1775
Racer
Join Date: Feb 2008
Location: Canada & N.Country NY
Posts: 403
Likes: 0
Received 0 Likes
on
0 Posts
How about the Cargo division of a major airline? Might not be as convenient (you'd have to bring the item to an airport etc), but could be less expensive perhaps, and I'm sure they'd take an item over 42 in.
Last edited by breale01; 08-05-2010 at 11:01 AM.
#1776
964 Parts a palooza - wheels roll bar recaro spd wheel bearings brakes etc
I have a ton of things to sell from my 964
DAS Sport 2 piece bolt in Roll Bar - $750
FACTORY Shop manuals in original binders - $250
Brand new in the box REAR wheel bearings (2) New $100 - $60 for both (good insurance to have a set around)
SOLD Brand new in the box Performance Friction 97 compound brakes (2 sets) New $125/set - Each set $80
2- Recaro Black SPD seats with slides mounted for 964 BOLT IN. These have the cut out for the sub belt stitched in - Paid almost $2k for both with slides, I will take $900 for both
Complete sets of 996 twist wheels (track duty) nearly brand new set of TOYO RA1 track tires - 1 day on the fronts, rear are NEW $800
Complete set of 996 twist wheels also track duty with worn out Toyo RA1 track tires. Rears have a few sessions left. $400
3 wheels 996 style comprised of 2 fronts and 1 rear - I will sell these as singles for $125 each or $275 for all 3
2 complete sets of 2" Red SCHROTH 5 point harnesses, driver and passenger (expired 2008)
1 set of (2) rear spacers for the 996 wheels to move the offset out $50
Fire extinguisher for mounting to roll bar
Reasonable offers considered. I can ship the small stuff, would prefer local pickup on the bigger items. Shipping (actual) extra. Paypal ok
Click on link for detail pics.
http://picasaweb.google.com/conrad.a...eat=directlink
DAS Sport 2 piece bolt in Roll Bar - $750
FACTORY Shop manuals in original binders - $250
Brand new in the box REAR wheel bearings (2) New $100 - $60 for both (good insurance to have a set around)
SOLD Brand new in the box Performance Friction 97 compound brakes (2 sets) New $125/set - Each set $80
2- Recaro Black SPD seats with slides mounted for 964 BOLT IN. These have the cut out for the sub belt stitched in - Paid almost $2k for both with slides, I will take $900 for both
Complete sets of 996 twist wheels (track duty) nearly brand new set of TOYO RA1 track tires - 1 day on the fronts, rear are NEW $800
Complete set of 996 twist wheels also track duty with worn out Toyo RA1 track tires. Rears have a few sessions left. $400
3 wheels 996 style comprised of 2 fronts and 1 rear - I will sell these as singles for $125 each or $275 for all 3
2 complete sets of 2" Red SCHROTH 5 point harnesses, driver and passenger (expired 2008)
1 set of (2) rear spacers for the 996 wheels to move the offset out $50
Fire extinguisher for mounting to roll bar
Reasonable offers considered. I can ship the small stuff, would prefer local pickup on the bigger items. Shipping (actual) extra. Paypal ok
Click on link for detail pics.
http://picasaweb.google.com/conrad.a...eat=directlink
Last edited by Adam Conrad; 08-21-2010 at 04:31 PM. Reason: Add pics
#1777
Racer
I'd be interested in the factory manuals. I'll PM you.
#1778
FS: From my 1992 USA Cup 964: NLA Magnesium Engine Mounts & Pagid Green Brake Pads!!!
For Sale: From my 1992 USA Cup 964:
*Magnesium Motor Mounts:
PORSCHE Part Number: 964.375.101.70 (MSRP: $461.16)
*Pagid Green Brake Pads:
PORSCHE Part Numbers:
Front: 959.351.940.91 (MSRP: $402.70)
Rear: 951.351.940.91 (MSRP: $323.67)
Rennlist Price: $595 for the lot (Magnesium Engine Mounts & Brake Pads) + actual shipping.
ALL SALES FINAL.
California Buyers Subject to 8.75% Sales Tax.
Please PM or call with any questions (858) 454 – 9898 (9am-9pm PST).
*Magnesium Motor Mounts:
PORSCHE Part Number: 964.375.101.70 (MSRP: $461.16)
*Pagid Green Brake Pads:
PORSCHE Part Numbers:
Front: 959.351.940.91 (MSRP: $402.70)
Rear: 951.351.940.91 (MSRP: $323.67)
Rennlist Price: $595 for the lot (Magnesium Engine Mounts & Brake Pads) + actual shipping.
ALL SALES FINAL.
California Buyers Subject to 8.75% Sales Tax.
Please PM or call with any questions (858) 454 – 9898 (9am-9pm PST).
#1784
Rennlist Member
Like new set of H&R red springs for 964 for sale. Only used for 5000 miles.
Asking $265 +shipping. CONUS only
Porsche Fan,
I see the magnesium motor mounts are sand cast which I find interesting. Any chance you can post a weight for them. Just curious.
Asking $265 +shipping. CONUS only
Porsche Fan,
I see the magnesium motor mounts are sand cast which I find interesting. Any chance you can post a weight for them. Just curious.
#1785
Three Wheelin'
Okay - it's official - I've bought a hotted-up race engine - 330+HP, just rebuilt. Can't wait to get this in!
So this means my dead-stock, 120k mile 3.6 which is noisy - but powerful - is up for grabs. It leaks - mostly from the OPS on top and needs a valvle adjustment and cleaning - but you'll have it out so these'll be easy. Starts flawlessly, NO oil smoke EVER and pulls very strongly. (Yes, I just want MORE).
Mobil 1 all the time.
The engine is still in the car and can be "auditoined" in person or via skype video - and will ship continent-wide at your expense.
Offers over $6k will be taken until Sept 24th - upon which the car will be going into the shop for the swap.
Let me know if you want pics, details, or a "viewing".
Thanks!
RK
So this means my dead-stock, 120k mile 3.6 which is noisy - but powerful - is up for grabs. It leaks - mostly from the OPS on top and needs a valvle adjustment and cleaning - but you'll have it out so these'll be easy. Starts flawlessly, NO oil smoke EVER and pulls very strongly. (Yes, I just want MORE).
Mobil 1 all the time.
The engine is still in the car and can be "auditoined" in person or via skype video - and will ship continent-wide at your expense.
Offers over $6k will be taken until Sept 24th - upon which the car will be going into the shop for the swap.
Let me know if you want pics, details, or a "viewing".
Thanks!
RK