The For Sale/Trade/Wanted thread *Posting by paying Members only*! PRICES NEEDED.
#1757
Rennlist Member
I just noticed I have a cracked driver's side headlamp...
Wish I could afford to upgrade to H4s, does anyone have a driver's side they would like to sell? Just need the headlamp, no bucket/frame.
Many thanks in advance,
Udo
Wish I could afford to upgrade to H4s, does anyone have a driver's side they would like to sell? Just need the headlamp, no bucket/frame.
Many thanks in advance,
Udo
#1758
964T Speedline wheels for sale
Genuine 3.6L 3 piece Speedline wheels as originally supplied with a 964T 3.6L car. They were refurbished by the previous owner and put on my car before I bought it in August '09.
One of the rear wheels has a repair weld on the inner rim, which I show in the photos. This wheel is true and balanced, its performance is unaffected by the repair. I discussed this with PWS (used to be an agent for Speedline in the UK) and another Speedline refurbisher and both told me as long as the wheel is true and balanced then its mechanical performance is unaffected.
When the PO refurbished them the original etching was not reinstated, and I'm pretty sure the bolts used are not genuine speedline bolts.
Part numbers:
Front: 965.362.136.00
Rear: 965.362.140.00
The sizes are: Front 8 ET52, Rear 10 ET61
Tyres and centre caps not included - sale is for the wheels only
Click here for pictures.
I'm looking for £2,800, or best offer.
Thanks for looking, Josh
PS - I am based in Clapham, SW11 (UK)
One of the rear wheels has a repair weld on the inner rim, which I show in the photos. This wheel is true and balanced, its performance is unaffected by the repair. I discussed this with PWS (used to be an agent for Speedline in the UK) and another Speedline refurbisher and both told me as long as the wheel is true and balanced then its mechanical performance is unaffected.
When the PO refurbished them the original etching was not reinstated, and I'm pretty sure the bolts used are not genuine speedline bolts.
Part numbers:
Front: 965.362.136.00
Rear: 965.362.140.00
The sizes are: Front 8 ET52, Rear 10 ET61
Tyres and centre caps not included - sale is for the wheels only
Click here for pictures.
I'm looking for £2,800, or best offer.
Thanks for looking, Josh
PS - I am based in Clapham, SW11 (UK)
#1759
So, you're selling a set of repaired, no longer original bolts, no etchings anymore, used wheels for over 4K USD, when not that long ago a guy had trouble selling NEW wheels of the same type (only more rare) for 4150?
https://rennlist.com/forums/993-foru...eyre-here.html
https://rennlist.com/forums/993-foru...eyre-here.html
#1760
Thanks for the feedback George - I was fretting over how to price these, so I asked 2 964T owners who have the same wheels and both suggested a price in the region I mention. Maybe the UK market for these wheels is slightly different to the US? (I dont know). Ideally I wanted to just put "best offers", but the forum doesnt let you do that. People can offer whatever they think the wheels are worth.
I dont want to offend anyone - should I remove the ads and just go via ebay rather than the forum?
I dont want to offend anyone - should I remove the ads and just go via ebay rather than the forum?
#1761
Glad you're not offended, I did not mean that.
Price them as you want, they're yours, and only you know what you need to get for them. If it is a fire sale, then ask around and price accordingly.
If I was in the market, I would offer about 3K US for these.
Edit: if it is not a necessity sale, hang on to them and the market will catch up, as they're very likely no longer made.
Price them as you want, they're yours, and only you know what you need to get for them. If it is a fire sale, then ask around and price accordingly.
If I was in the market, I would offer about 3K US for these.
Edit: if it is not a necessity sale, hang on to them and the market will catch up, as they're very likely no longer made.
#1762
Instructor
Join Date: Jan 2010
Location: Beautiful Melbourne, Australia
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Geordie, Go eBay, regularly available and quite cheap. I think they were even some for sale on ebay australia. www.ebay.com.au and they weren't expensive. Note that your heater will not work with this installed, so you may as well also add some full race headers!!
#1763
Instructor
Three Carrera 4 center caps (already gone)
Three caps with two different styles, one cap bulges inward (993.361.303.04), the others bulge slightly outward (993.361.303.01 FFF). Broken tab on one.
Free to any Rennlist Member - pm me with your address in Canada or US.
EDIT: headed to GeorgeK in Switzerland!
Free to any Rennlist Member - pm me with your address in Canada or US.
EDIT: headed to GeorgeK in Switzerland!
Last edited by speedcat; 07-09-2010 at 12:14 PM.
#1764
Three Wheelin'
Join Date: May 2005
Location: Reston, VA
Posts: 1,339
Likes: 0
Received 0 Likes
on
0 Posts
In the ever spiraling process of making my 964 more track focused, I've removed the AC and installed an RS carpet set, which puts this stuff up for sale:
964 A/C compressor - $75 plus shipping. Blew nice, cold air right up until the moment I took it out.
Tan rear seats - SOLD. Nice condition, I'd shampoo the carpet on the seat backs and install em.
http://i7.photobucket.com/albums/y26...s/IMG_4798.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4799.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4800.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4802.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4803.jpg
PM me or email at cniblett@gmail.com
Thanks!
Chase
EDIT: I've also still got this left side window seal for a Coupe, brand new in packaging
$55 shipped to the lower 48.
964 A/C compressor - $75 plus shipping. Blew nice, cold air right up until the moment I took it out.
Tan rear seats - SOLD. Nice condition, I'd shampoo the carpet on the seat backs and install em.
http://i7.photobucket.com/albums/y26...s/IMG_4798.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4799.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4800.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4802.jpg
http://i7.photobucket.com/albums/y26...s/IMG_4803.jpg
PM me or email at cniblett@gmail.com
Thanks!
Chase
EDIT: I've also still got this left side window seal for a Coupe, brand new in packaging
$55 shipped to the lower 48.
Last edited by ChaseN; 07-26-2010 at 12:36 AM.
#1765
Rennlist Member
Tires (free), Spoiler(interesting) SOLD , Harness bar
Tires - free for pickup, probably not worth paying for shipping costs
Still Available: Bridgestone S-03 one- 255/40-17 good tread, I bought this for $50 for a backup spare in case I cut a tire.
GONE Two - 225/45-17 useable if you need a spare. I really liked these tires, wish I could have found a new set, but I settled for Sumitomo's HTR-ZIII
SOLD Spoiler - original pop up 964 spoiler, with an interesting and well made/ well fitting add-on spoiler. This came with my current C4, which has a fiberglass tail installed. The spoiler comes with the motor drive and parts. I do not know the condition of the motor. $150 + shipping I can take additional pictures if you need another angle.
PENDING Sale w/ one on waitlist: Weltmeister Harness Bar part#910185 911 Coupe 1969-98 lists for $219. - $125 plus shipping
from their description: "You can remove these bars when not in use and leave no ugly telltale holes in your upholstery or sheet metal. Made from thick-wall, large 1 1/2" diameter roll bar tubing, for the extrastrength you’re looking for. Weltmeister harness bars are finished in durable rich-looking powder-coated black finish that adds a long-lasting factory-style appearance to your interior. Each harness bar has guides to keep your shoulder harness belts in place. Note: There is no front seat movement restriction with 911 bolt-in harness bars—even for tall drivers."
More parts to come... cleaning out!
Still Available: Bridgestone S-03 one- 255/40-17 good tread, I bought this for $50 for a backup spare in case I cut a tire.
GONE Two - 225/45-17 useable if you need a spare. I really liked these tires, wish I could have found a new set, but I settled for Sumitomo's HTR-ZIII
SOLD Spoiler - original pop up 964 spoiler, with an interesting and well made/ well fitting add-on spoiler. This came with my current C4, which has a fiberglass tail installed. The spoiler comes with the motor drive and parts. I do not know the condition of the motor. $150 + shipping I can take additional pictures if you need another angle.
PENDING Sale w/ one on waitlist: Weltmeister Harness Bar part#910185 911 Coupe 1969-98 lists for $219. - $125 plus shipping
from their description: "You can remove these bars when not in use and leave no ugly telltale holes in your upholstery or sheet metal. Made from thick-wall, large 1 1/2" diameter roll bar tubing, for the extrastrength you’re looking for. Weltmeister harness bars are finished in durable rich-looking powder-coated black finish that adds a long-lasting factory-style appearance to your interior. Each harness bar has guides to keep your shoulder harness belts in place. Note: There is no front seat movement restriction with 911 bolt-in harness bars—even for tall drivers."
More parts to come... cleaning out!
Last edited by DWS964; 08-04-2010 at 10:37 PM.
#1769
Rennlist Member
I have a set of used H&R Greens with Bilstein HD absorbers for an 89-91 964 that I'm not using. I went with a different set up for track. I'd prefer to sell them as a set, but I might be willing to split them up. I'll be posting this in the rennlist classifieds as well.
Sold
Sold
Last edited by provoste; 08-19-2010 at 09:20 AM. Reason: Item sold