Factory 3.8RS tail and Front Splitter
#16
Professor of Pending Projects
Rennlist Member
Rennlist Member
Originally Posted by Flachbau
Yes, the lips are a seperate piece attached on the stock tray. That's why some aftermarket guys sell fiberglass lips only. If you want to see a bunch of photos of these lips installed go to www.flachbau.com.
Mark
Mark
#17
Technical Guru
Rennlist Member
Rennlist Member
Originally Posted by Flachbau
If you want to see a bunch of photos of these lips installed go to www.flachbau.com.
#20
Burning Brakes
Originally Posted by JasonAndreas
Do you have any photos of the lips uninstalled? What are the dimensions of the lips? Will they fit a narrow-body? I have several gallons of Dow Corning T-4 RTV silicone that is used for casting polyurethane pieces. I need to use the RTV for something before July and we could easily get 50-75 pulls from the molds. If PMNA is asking for a lot of $$$ it might be worth trying.
#21
Burning Brakes
Originally Posted by Wachuko
Flachbau, nice site!! Hope is ok to post some photos from there, if not let me know and I will remove the links. Here are two images from Flachbau site that show the lips a bit more clear.
#22
Burning Brakes
Originally Posted by Cupcar#12
i have to agree - very nice site.
Good info as well.
Good info as well.
#24
Burning Brakes
Originally Posted by bhensarl
Did anybody notice that some of the Flachbaus had vents in place of the fogs that copied Garrett's mesh screen idea? Good work, Garrett.
Brian
Brian