Red Wheel Stud
10-31-2001, 10:12 AM
#1
Instructor
Thread Starter
Red Wheel Stud
I have a 1992 C2 Coupe with Cup wheels. While I knew about the procedure to locate the locking nut opposite the valve stem, I was not aware of the relative positioning re: the red stud until I read it in a discussion topic.
Trouble is, on the left front, the red paint is no longer visible. Is there a technique to find which wheel stud be the "red one"?
Trouble is, on the left front, the red paint is no longer visible. Is there a technique to find which wheel stud be the "red one"?
10-31-2001, 12:33 PM
#2
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
John;
If there is no trace of paint, the only way I would know is to take and have the wheel mounted to the car and spun balanced. There aren't to many people doing this. Then remark the stud. Good luck.
If there is no trace of paint, the only way I would know is to take and have the wheel mounted to the car and spun balanced. There aren't to many people doing this. Then remark the stud. Good luck.
