ISV, air-flow meter and idle microswitch clean
#33
Burning Brakes
Join Date: May 2003
Location: N. OC, CA
Posts: 1,060
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DavidI
Peter, maybe a good reason to go one stage better and do the sensor of the AFM?.
I did clean the AFM except that I did not remove the top cover to gain access to the actual sensor. The cover was held down by some sort of silicone. And since the sensor is sensitive to contamination, I didn't want to reseal it with just some off the shelf silicone. Any idea as to what type of silicone can be used?
#36
Technical Guru
Rennlist Member
Rennlist Member
Most RTV silicone is not compatible with your oxygen sensor and will severely shorten its life. Be 100% positive that the sealant you use says "oxygen sensor safe" somewhere on its labeling.