Plug & Play Oil cooler mod
#39
Receiving more & more positive feedback on a more stable & acceptable oil temp and ease of installation of the cable.
I had a spirited drive with 4 964's last weekend all using the mod. Installation done before the drive took not more than 15min per 964.
One had a two rusted screws, after spraying some WD40 on the screws the job was again done in 15minutes.
I had a spirited drive with 4 964's last weekend all using the mod. Installation done before the drive took not more than 15min per 964.
One had a two rusted screws, after spraying some WD40 on the screws the job was again done in 15minutes.
Last edited by Kappi2907; 07-20-2019 at 01:17 PM.
#40
Drifting
So, I had my first test of this mod last weekend doing a track day with the Swedish Porsche club. Outside temp was about 23 C an mostly sunny. Did 20-25 min stints and the engine temp stayed around +/- 9 o’clock during a stin. So I guess it did what it is supposed to do. Installation was super easy.
The following users liked this post:
9SIX4-C4 (08-03-2020)
The following users liked this post:
9SIX4-C4 (08-03-2020)