Lowering help
12-28-2018, 01:47 AM
#46
Three Wheelin'
Thread Starter
Out with the old
In with the new
12-28-2018, 02:05 AM
#47
Three Wheelin'
Thread Starter
Well I'm halfway there! Got the rear springs in (they will have to come back out as the bump stops were missing!) Took the car for a quick drive around the block and put a full tank of fuel in it. The rear has come down approximately 20mm with the new springs, I was hoping for maybe 30mm but it looks near perfect. I absolutely love how the car looks now! Tomorrow I'll go for another drive and set the ride height, I'm guessing it's around rs height in the rear. Thanks for everyone's help so far
12-28-2018, 02:44 AM
#48
Three Wheelin'
Thread Starter
Pic for spokes
12-28-2018, 02:58 AM
#49
Rennlist Member
^^^ yep that is the bellow (dust cover) and it looks like the bump spring is left over inside. Past its best!
12-28-2018, 03:05 AM
#50
Three Wheelin'
Thread Starter
12-28-2018, 09:19 AM
#51
Addict
Rennlist Member
Rennlist Member
Nice improvement in ride height Dingo, looking good!
I’m running the same springs and shock combo and I’m very happy with them.
I’m running the same springs and shock combo and I’m very happy with them.
12-28-2018, 04:36 PM
#52
Three Wheelin'
Thread Starter
Thanks mb, I'm really happy with how it sits now. Looking forward to getting out for a decent drive!
01-23-2019, 01:49 AM
#53
Three Wheelin'
Thread Starter
01-23-2019, 01:50 AM
#54
Three Wheelin'
Thread Starter
Bump stops and dust boots for rear suspension arrived today.
01-31-2019, 01:29 AM
#55
Three Wheelin'
Thread Starter
Just finished installing the springs. Spent the afternoon setting the rideheight and have achieved rs height all round 
Just wanto confirm, in Adrian's book it says 218 for the rear but I read elsewhere its 223. Probably trivial anyway.
Just wanto confirm, in Adrian's book it says 218 for the rear but I read elsewhere its 223. Probably trivial anyway.
01-31-2019, 01:14 PM
#56
Rennlist Member
