Dingo

Hi mb, I've been so busy doing other things and it's winter so it's been ok!

Dingo

Definitely looking foward to going for a drive though!

Dingo

Finally have a working sunroof! Thanks john mcm and spokes.

Before
After!

Dingo

Next I'm going to replace the crappy old scuttle seals!

first I loosened these 2 bolts

Then started pulling the old ones out

What a mess!

Im in two minds about replacing them now it looks so good without them!

Dingo

One side in with the help from the mrs!
Mrs dingo smashing the new seals in!

Dingo

looks pretty good!

Marine Blue

Wow she did good!

Dingo

Agreed! It's great to have a second pair of eyes and someone to talk things through with before stuffing it up! Unfortunately she isnt interested in doing the other side with me! Was quite tedious to get it right!

Dingo

Stuffed this one up and ripped it while trying to remove it which has really pissed me off

Dingo

Got a mate to make me these things to mate my jackstands to the 964

Dingo

Now it's time to replace the cv boots

First i cracked the 32mm axle nut

Then got the car on the new jackstands, made sure to put the wheel under the car incase of an earthquake or anything!

This will do me for today!

Dingo

Forgot to take progress photos but here is 1 driveshaft!

Dingo

Sho

Should I try and clean this area or will I risk damage to the bearing?

Kuro Neko

Good practice!
I was taught, never get under a car unless you have two points of support.

Earthquakes or not...

Fulham68

Hi Dingo, good job. I’m about to do this next week. What do I need to disconnect to get the shaft on the bench? I’m worried I have to do the alignment again.