Looks like I have 3 interested parties so far. I'm going to place the order on Monday if that is it.

 

I have a couple sets of these left. I also have C6 Z06 Caliper (6 piston) adapters for both 944 and 951 front hubs. I'm working on adapters for rear Cayenne brakes, might look into fronts if it seems like a possibility.

 

Has anyone ever come up with a rotor shield solution for these bigger brake conversions?

 

I have not seen any before. I guess someone could probably reuse a dust shield off a Cayenne or maybe another vehicle with similar size brakes.

 

Im interested in the adapters, i just bought a bike so let me see what the wife says....

 

Sounds good. You can tell her big brakes makes the car safer. Send me a PM if you decide to do a big brake swap. LS460 calipers are cheap!

 

superman22x, I know it's an old thread, but I'm interested in the LS460 conversion and in need of adapters and centering rings. Do you have any on hand still? I'm too new to PM you, but please feel free to PM me.

 

I don't actually make the LS460 adapters, I've never found a print. But I believe all you need is a drill pretty much. No machinery needed. For the centering rings, I just made an extra set! Good timing. I'll send you a PM if it lets me.

 

So it seems like I can't send you a PM either. I recommend finding some interesting topics, make some posts, and shoot mean message!

 

I made a few posts but still don't seem to be able to contact you. I'd like to get a pair of Cayenne centering rings for a late offset, non-M030 944 hub though.

 

Let me know if you are able to see the PMs I sent. I added my email in there.