Kokeln turbo k27 #8 hotside and speedforce 2.5" intecooler black pipes fs:
05-26-2016, 02:44 PM
#1
Three Wheelin'
Thread Starter
Kokeln turbo k27 #8 hotside and speedforce 2.5" intecooler black pipes fs:
Kokeln 951 aftermarket high performance turbocharger with stock oil line and exhaust pipe locations. I bought this a few years ago used and never used it, it's been in garage in a box. It's a Kokeln turbo 2 3/4" inlet and #8 hotside its dry so no water cooling necessary oil cooled.
Bye the size of it I would compare it to a k27/8
Sorry I don't know what comp is in it and if it's ball bearing or not. It spins extremely easy for sitting in a box for a few years I know that. And when you try to move shaft laterally or side to side I get almost 0 movement it's nice and tight. I have looked inside both cold and hot sides with a flashlight to carefully see if there are any chips or chewed up fins and all corners look very clean.
I would not hesitate to use this turbo in a 951 build right now as is.
$700 shipped conus
Pipes sold
Bye the size of it I would compare it to a k27/8
Sorry I don't know what comp is in it and if it's ball bearing or not. It spins extremely easy for sitting in a box for a few years I know that. And when you try to move shaft laterally or side to side I get almost 0 movement it's nice and tight. I have looked inside both cold and hot sides with a flashlight to carefully see if there are any chips or chewed up fins and all corners look very clean.
I would not hesitate to use this turbo in a 951 build right now as is.
$700 shipped conus
Pipes sold
Last edited by boost feen; 05-30-2016 at 07:20 PM.
05-18-2019, 08:12 AM
#3
Intermediate
Join Date: Apr 2017
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Hello my friend,
Do you still have your Kokeln loader? My email is:
andrahase@arcor.de,
thanks Dominik
Do you still have your Kokeln loader? My email is:
andrahase@arcor.de,
thanks Dominik