Feeler post. 16v turbo pistons???
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Might need to find a set of backup pistons to put into a turbo motor. Don't have time to order them now so wondering if anyone has any that they've got for a future project that they don't need just yet?
#2
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![Big Grin](https://rennlist.com/forums/images/smilies/biggrin.gif)
#3
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Sorry, for a stock 16v 3ltr Alusil block to fit turbo sized rods. I know Wossner make them but we don't have time to order / receive / build before event. This is a long shot but need to ask the questions.
#4
Rainman
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
this guy has a set of S2 spec wossners.
on the FB parts group run by Broadfoot...
https://www.facebook.com/photo.php?f...type=1&theater
on the FB parts group run by Broadfoot...
https://www.facebook.com/photo.php?f...type=1&theater
#5
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Lindsey/Broadfoot/SFR maybe even Lart may have a set. I'd PM Lart and send an email to Broadfoot - Lindsey - SFR - and www.928motorsports.com
I'll sent an email to the AZ/LA/Phoenix folks, but most of them use Nikasil/NiCom or steel sleeved applications.
Good luck Patrick.
I'll sent an email to the AZ/LA/Phoenix folks, but most of them use Nikasil/NiCom or steel sleeved applications.
Good luck Patrick.
#6
Drifting
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Patrick,
Heritage used to stock Mahle turbo pistons for the Alusil blocks.
Heritage Motorcar Restoration LLC
3220 38th Ave S
Saint Petersburg, FL 33712
(727) 623-9993 (phone)
jasonhiler@heritagemotorcar.com
Heritage used to stock Mahle turbo pistons for the Alusil blocks.
Heritage Motorcar Restoration LLC
3220 38th Ave S
Saint Petersburg, FL 33712
(727) 623-9993 (phone)
jasonhiler@heritagemotorcar.com
#7
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks a bunch for your detailed assistance guys. Shall follow up.