Torsion Bar Delete and Torsion Tube Replacement
07-19-2015, 06:49 PM
#1
Drifting
Thread Starter
Join Date: Aug 2009
Location: Bangkok, Thailand, Milpitas, CA & Weeki Wachee, FL
Posts: 2,239
Likes: 0
Received 2 Likes
on
1 Post
Torsion Bar Delete and Torsion Tube Replacement
I am curious if anybody knows who makes the torsion tube replacement shown in the picture below. This was posted by Patrick a long time ago on another forum. There was a better pic of the entire piece, but having a hard time finding it.
07-19-2015, 07:56 PM
#2
Rennlist Member
Eric that was made by Bruce (95ONE). There is a thread in here detailing certain 'characteristics' of that particular item. Possibly fine to run on a street car.
https://rennlist.com/forums/944-turb...-complete.html
https://rennlist.com/forums/944-turb...-complete.html
07-19-2015, 09:14 PM
#4
Three Wheelin'
I've got a complete one for sale if you want, including trailing blades and all hardware. After the issues discovered in the thread linked by Patrick above I wasn't comfortable running it. I'd sell it cheap, buyer beware that it needs reinforcement. Here's a picture, front suspension stuff not included of course.
07-19-2015, 09:37 PM
#6
Three Wheelin'
JustinL is offering his for US$400 but hasn't had any takers (original price was over $800). I've waited a while to be polite, but I figure it's OK to undercut him now. US$300 plus shipping, keep in mind I'm in Canada.
Trending Topics
07-19-2015, 11:13 PM
#8
Drifting
Thread Starter
Join Date: Aug 2009
Location: Bangkok, Thailand, Milpitas, CA & Weeki Wachee, FL
Posts: 2,239
Likes: 0
Received 2 Likes
on
1 Post
Torsion Bar Delete and Torsion Tube Replacement
I am not tracking my car, I just like the clean look of this setup. Just going down the road should not be too bad. I have discussed this a bit with Patrick.
07-20-2015, 12:18 AM
#11
Drifting
Thread Starter
Join Date: Aug 2009
Location: Bangkok, Thailand, Milpitas, CA & Weeki Wachee, FL
Posts: 2,239
Likes: 0
Received 2 Likes
on
1 Post
Torsion Bar Delete and Torsion Tube Replacement
Only took about an hour to read that giant thread. Not sure anything would be needed for a street car. However, I will probably add the tabs.
07-20-2015, 11:42 AM
#13
Three Wheelin'
Sent you a PM this morning, here's a copy:
--------
Hello,
I'll get some cardboard this week to pack it up securely then take it to the post office on the weekend to get a shipping estimate. Can you let me know your address? Once I have the total with shipping I'll give you my PayPal info. Thanks.
--------
Hello,
I'll get some cardboard this week to pack it up securely then take it to the post office on the weekend to get a shipping estimate. Can you let me know your address? Once I have the total with shipping I'll give you my PayPal info. Thanks.