Looking for a 951 owner in SoCal
04-23-2015, 10:06 PM
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Looking for a 951 owner in SoCal
looking for the owner of a 87 951 with m474 suspension, sewer lids wheels, the car was gold, the engine was built but never ran this happen around 7-8 years ago, what I can see so far are:
J&E pistons
Carrillo rods
Sleeved block
Knife & edge crank
New T04e turbo
Ported head with valve job
Lindsey racing 3 pcs cross-member
Engine Solid Mounts
The owner had to live either in Riverside of San Bernandino county
I just need the specs I will hate to throw away thousands of dollars of labor by taking a brand new engine apart.
Tia
Lart
J&E pistons
Carrillo rods
Sleeved block
Knife & edge crank
New T04e turbo
Ported head with valve job
Lindsey racing 3 pcs cross-member
Engine Solid Mounts
The owner had to live either in Riverside of San Bernandino county
I just need the specs I will hate to throw away thousands of dollars of labor by taking a brand new engine apart.
Tia
Lart
__________________
http://stores.ebay.com/Larts-Porsche...0&_sc=1http://
https://www.ebay.com/str/lartsporscheparts
http://stores.ebay.com/Larts-Porsche...0&_sc=1http://
https://www.ebay.com/str/lartsporscheparts
Last edited by lart951; 04-23-2015 at 11:38 PM.
04-24-2015, 04:55 PM
#7
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
the block was a broadfoot racing it was a 2.7L. 104mm J&E Pistons, Pauter Rods, Knife & Edged crank , sleeved block, it was sold last night to a Lister, I will be posting for sale what is left.
Turbo 60mm comp wheel, wet CHRA, #10 turbine housing with a stage V turbine wheel. Will support 500 crank HP $ 799.99 shipped CONUSA is NEW
Ported Head with valve job $ 799.99 shipped conusa
Turbo 60mm comp wheel, wet CHRA, #10 turbine housing with a stage V turbine wheel. Will support 500 crank HP $ 799.99 shipped CONUSA is NEW
Ported Head with valve job $ 799.99 shipped conusa