Replacement Aluminum Rogue Tuning MAF tube
#3
Rennlist Member
Looks good...but the transfer function is going to be different. The tube is quite important and very small changes can have a pretty big impact. Do you have the tuner? I think you are going to need it.
#5
#7
Professional Hoon
Rennlist Member
Rennlist Member
Join Date: Jan 2010
Location: Melbourne, Australia
Posts: 7,090
Likes: 0
Received 4 Likes
on
4 Posts
I went though this not long ago. I also spoke to josh about numbers ect.
I made one, to exact specs. The plastic MAF tube isn't exactly round (by ~2-4mm) so my aluminium tube couldn't get the right flow though it to replicate the original one. we also tried to bore out the aluminium one further.
I can see that you need the modified one. Good luck, but you'll need the tuner also.
I made one, to exact specs. The plastic MAF tube isn't exactly round (by ~2-4mm) so my aluminium tube couldn't get the right flow though it to replicate the original one. we also tried to bore out the aluminium one further.
I can see that you need the modified one. Good luck, but you'll need the tuner also.
Trending Topics
#9
Rennlist Member
Project looks really good. Hope we can meet up sometime this Spring.
#11
Rennlist Member
#14
Rennlist Member
#15
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
But the MAF sensor is different... As is the transfer function.