Steel Wide body LS3
#33
Drifting
#34
Drifting
#35
Rennlist Member
Thread Starter
wide body
Attached are some pictures of the car after paint.
I am also building a new GT3 Class 944 tub in Carbon fiber and I will be venting the top and sides of both the front and rear wide body fenders
I am also building a new GT3 Class 944 tub in Carbon fiber and I will be venting the top and sides of both the front and rear wide body fenders
Last edited by Max Energy; 11-16-2017 at 06:47 PM. Reason: spelling
#39
Drifting
Mr. Max, is that the exhaust hole in front of the rear quarter pales? It's pretty cool looking. Well the whole car is really cool looking, ok both cars are really sweet.
#42
Rennlist Member
Thread Starter
Guys,
The Red Fiberglass hood(V8 Street car) is from IFC Porsche Fiberglass, The Black Carbon Fiber Hood (GT3 944/968 Race Car) is from Scheimann Composites.
In regards to the side openings, yes those are exhaust outlets and will be finished off with Carbon Fiber Bezel around the openings.
PS: Race Car-Jim the drop spindles will work fine(thank you), machining to accept the 997 GT2 front calipers.
Additionally I did receive my OMP Carbon Fiber Seat and OMP CF Steering Wheel and the Racers Edge M030 Billet Front Hubs.
Also did order the Triple Adjustable JRZ's. Slow Project
The Red Fiberglass hood(V8 Street car) is from IFC Porsche Fiberglass, The Black Carbon Fiber Hood (GT3 944/968 Race Car) is from Scheimann Composites.
In regards to the side openings, yes those are exhaust outlets and will be finished off with Carbon Fiber Bezel around the openings.
PS: Race Car-Jim the drop spindles will work fine(thank you), machining to accept the 997 GT2 front calipers.
Additionally I did receive my OMP Carbon Fiber Seat and OMP CF Steering Wheel and the Racers Edge M030 Billet Front Hubs.
Also did order the Triple Adjustable JRZ's. Slow Project