Question re calipers ??
#16
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Apparently these were meant to be Ti pistons?? Turns out that the prices I was quoted for a rebuild kit didn't include the pistons. Factor in say @$50 x 12 = $600 more for these. Seals $250. Labour more hundreds. ergghhh....
#19
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Are the GT3 M450 pistons titanium with ceramic coating? I'm having my calipers rebuilt atm. Just left them to be painted. I already ordered new seals from Zeckhausen. These calipers are not cheap to rebuild.
#21
#22
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
They should be a two piece piston. Titanium with a removable ceramic tip.
#23
#24
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The calipers in this thread are 997.2 , not 996. The mounting bolt pattern is wider apart on the later version. I've been quoted $100 per 2 part piston so $1200 just for them....am now shopping for new calipers. This whole process has been delightful....
#27
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
It wasn't a shop.
#28
Nordschleife Master
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
A good thing about race calipers is that you also save weight. My AP Racing 6 piston calipers are 400 gram lighter each than the 4 piston 944 Turbo S caliper. And I don't remember the 996/997 monoblock calipers to be any lighter than the old Porsche/Brembo calipers.
#29
Drifting
Join Date: Aug 2009
Location: Bangkok, Thailand, Milpitas, CA & Weeki Wachee, FL
Posts: 2,239
Likes: 0
Received 2 Likes
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The NASCAR boys use similar if not identical AP callipers to Duke's on the two road courses and the short tracks. I thought it was very interesting to see on a 951.