Performance Parts FS...
06-25-2013 | 12:11 PM
#1
Thread Starter
Three Wheelin'
Joined: Feb 2007
Posts: 1,441
Likes: 1
From: Orange County, CA
Performance Parts FS...
I'm changing direction with the car and heading down the V8 path...
The following parts are either brand new or have less than 10k on them. The engine is currently in the car, but soon to be pulled and parts cleaned up for sale. Below are most of the major parts of interest, but if you need something that's not listed, just asked. Many of the parts, hardware, shields and brackets were either re-zinc'd or powder coated. Everything looks new. I also have additional parts from 2 other motors laying around that need to go.
All prices are plus ship. I'll post pics ASAP
Link G4 Extreme, complete system (new) 2500
Cam, mild racing+housing 300 SOLD
Cam gear (adjustable) (new) 250 SOLD
Head, 930 exhaust valves, slightly ported, LR springs 800 SOLD
2.5 Crank - knife edged, crossed drilled 500 SOLD
Oil pan w/LR baffle 175 SOLD
LR Super 61 turbo, #8 hotside rebuilt 500 SOLD
Intake (powder coated polished alum) 75 SOLD
Spec Billet FW 250 SOLD
KEP 2 PP w/930disc 400 SOLD
101 Wosner pistons (new) w/stock rods 750
Nisson Quest Alt 75 SOLD
Alt delete bracket (new) 175 SOLD
Fuel rail (powder coated blk) 50 SOLD
LR Tree w/filter 75 SOLD
Saiko Michi catch can 65 SOLD
Auto belt tensioner 60 SOLD
Sparco Pro2000 seat (very slight wear) 400
Mocal oil cooler 75
Headers, thermal coated 375 SOLD
Crossover pipe, thermal coated 150 SOLD
Downpipe, thermal coated 75 SOLD
3" LR exhaust WG tied in 400 SOLD
The following parts are either brand new or have less than 10k on them. The engine is currently in the car, but soon to be pulled and parts cleaned up for sale. Below are most of the major parts of interest, but if you need something that's not listed, just asked. Many of the parts, hardware, shields and brackets were either re-zinc'd or powder coated. Everything looks new. I also have additional parts from 2 other motors laying around that need to go.
All prices are plus ship. I'll post pics ASAP
Link G4 Extreme, complete system (new) 2500
Cam, mild racing+housing 300 SOLD
Cam gear (adjustable) (new) 250 SOLD
Head, 930 exhaust valves, slightly ported, LR springs 800 SOLD
2.5 Crank - knife edged, crossed drilled 500 SOLD
Oil pan w/LR baffle 175 SOLD
LR Super 61 turbo, #8 hotside rebuilt 500 SOLD
Intake (powder coated polished alum) 75 SOLD
Spec Billet FW 250 SOLD
KEP 2 PP w/930disc 400 SOLD
101 Wosner pistons (new) w/stock rods 750
Nisson Quest Alt 75 SOLD
Alt delete bracket (new) 175 SOLD
Fuel rail (powder coated blk) 50 SOLD
LR Tree w/filter 75 SOLD
Saiko Michi catch can 65 SOLD
Auto belt tensioner 60 SOLD
Sparco Pro2000 seat (very slight wear) 400
Mocal oil cooler 75
Headers, thermal coated 375 SOLD
Crossover pipe, thermal coated 150 SOLD
Downpipe, thermal coated 75 SOLD
3" LR exhaust WG tied in 400 SOLD
Last edited by Fluidplay; 06-27-2013 at 11:51 PM. Reason: Update on sold items
Trending Topics
06-25-2013 | 10:50 PM
#11
Thread Starter
Three Wheelin'
Joined: Feb 2007
Posts: 1,441
Likes: 1
From: Orange County, CA
Replies sent to those who PM'd
Spencer, .480 lift, was done by Performance Developments. Unfortunately, I never got to put it to good use.
Supachink, single port on the intake, but you can get a two port banjo.
Spencer, .480 lift, was done by Performance Developments. Unfortunately, I never got to put it to good use.
Supachink, single port on the intake, but you can get a two port banjo.
