Ever seen this happen? :(
#1
Rennlist Member
Thread Starter
Ever seen this happen? :(
WTF!?
Great drive until...
Great drive until...
#2
Rennlist Member
Thread Starter
Oil blowing onto headers caught fire, luckily caught it real quick with extinguisher and no damage beyond the massive hole in the cam carrier...
#3
Rennlist Member
Ouch, sorry to see that. Probably left a screw in there, or one backed out, and it got caught between the tower and a lobe, with the tower losing fight. Did you spin the cam to see if the lobes have any damage?
#4
Rennlist Member
Thread Starter
That's what I'm betting at this point too, car still runs fine so will probably just find a new carrier and replace, could have been MUCH worse day!
#6
Rennlist Member
Thread Starter
interesting, will definitely be looking for signs of damage, so far seems 100% beside the hole/oil spill/tow ride...
Trending Topics
#8
Rennlist Member
Check to make sure the belt didn't jump on impact before running that motor much more. Cam towers are a dime a dozen, but be sure to check the valve train and cam for signs of damage too.
#9
Rennlist Member
Thread Starter
Will do for sure, belt has to come off anyway so will definitely check the timing/belt condition, cam looks good so far too, didn't feel or hear anything just smelt a bit of burnt oil and started to see some smoke, pull over quick and grab fire extinguisher..