Weltmiester spring help
#1
Race Car
Thread Starter
Join Date: Mar 2012
Location: Austin TX, drinking beer in the garage
Posts: 3,602
Likes: 0
Received 7 Likes
on
7 Posts
Weltmiester spring help
Does anybody know the wire diameter of the stock 951 springs and the different Welt offerings? I'm trying to ID what # welt springs I have but since I did not buy or install the springs I'm really just guessing. They just seem so low. Even with the 1 inch spacers installed my car still has at least a 1 inch drop over stock. This leads me to believe they are sagging, and when I replace them I want to go both taller and stiffer. I don't like the car quite as low as it is because i drive it on the street in a town full of hills and it scrapes. As far as I know I think they are the 200#. What would be a good thing to replace them with? This upgrade will be in conjunction with brand new hacksawed konis. I have koni yellows in the rear and stock T bars, stock sway bars front and rear.
#2
If your planning the hacksaw koni's just get the adjustable ride height kitwith the 2.5 dia springs and you will have almost unlimited spring choices and ride height.paragon is having a sale right now!