WTB: K27 Cold Side
#1
Rennlist Member
Thread Starter
WTB: K27 Cold Side
Hey guys I'm looking for a K27 cold side (seal plate, compressor housing and wheel). If you got one you wish to sell please let me know, I will pay good money for one. Looking for it ASAP, thanks.
#3
Rennlist Member
Thread Starter
Well I'm actually about to put the t04b H-trim (basically 70 trim) Stage 3 turbine in this week on weds trying to get it done in a days time (off from work), but I was hoping to build a k27 with my spare k26 as a backup or in case the t04b is too laggy. I'm thinking the t04b will be fine since its a stage 3 wheel and compressor is a decent size 60mm x 70mm, full boost is guessed around 3700RPM. I have yet to find someone who has used this turbo, everyone seems to use a t04b 50 or 57trim with a stage 3. Hoping for 325-350whp before E85 at 17psi.
The K27 I sold due to finances and thought to myself to just stick with the stock k26 but it's 200k miles and should be changed. Originally the K27/6 is the one I wanted but I got the t04b at a great deal so its worth the effort to see what shes like, I finished rebuilding her and shaft play seems to be within specs so we'll see. I'll make a build thread this coming week.
The K27 I sold due to finances and thought to myself to just stick with the stock k26 but it's 200k miles and should be changed. Originally the K27/6 is the one I wanted but I got the t04b at a great deal so its worth the effort to see what shes like, I finished rebuilding her and shaft play seems to be within specs so we'll see. I'll make a build thread this coming week.
#4
Pro
Not sure if I am answering your question - I had my K26/8 rebuilt into a K27/8 by Evergreen Turbo (Charlie) for a reasonable fee, this included a new K27 housing and compressor wheel - my guess is that you could call him and just order the parts if you are intending to do some of the work yourself although for the price if you are planning to use the turbo I would just let him rebuild it as he did mine.
#5
Three Wheelin'
Hmm, let me think on this for a day or two, I may be willing to part with my set. It's a new 7200 wheel + backplate, and then a backplate and housing from another K27 that will need to be machined out to the 7200 wheel diameter.