Pirrex

I accidentaly ripped out the cables from the 3-pole connector, which goes to the ISV, and now i have no idea in which order to connect it.

I now have like 10 inches of cable from the connector, which are white, brown and white/black, and these i need to attach to ones that i would remember are, black/red, blue/red (?) and white/black.

I don't think this is how it came from the factory, because it also looked quite homemade, but does anybody have any idea how to connect it?

Techno Duck

BL- Blue
RT- Red
SW- Black
WS- White

Pirrex

Thanks for the pic. I still have a problem, i don't know which is #1, and which is #3, because there's no numbers indicating that, either on the connector or the valve itself. It's probably just me, because i know almost nothing when it comes to the electric system,

mikeyoman

Here you go

Techno Duck

Hm, looking at the pinout and diagram its kinda confusing with the way everything is labeled. Here is the 'translation'.

Pirrex

Got it, thanks!

eric951turbo

does anybody know where I can get this plug? Just a brand new icv plug? Probably a bosh, but I can't find the # anywhere.

And I don't want to spend 136$ at LR for the entire harness http://www.lindseyracing.com/LR/Pors...-HAR-TEMP.html

Ski

www.eagleday.com

AMP connectors

eric951turbo

excellent, thank you

Doyle623

Also. I just bought this and replaced mine a week ago because my wires were exposed and touching.

Bosch 1 284 485 112 3 Way Connector Kit LK-3

http://bit.ly/14raD2N