When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Can you please give a quick "how to" mount for the wing?
Thank you.
I can...
1) Remove old rubber wing
2) Using only the bottom 3 pieces of trim center and mark for mounting holes
3) attach center strip using speed nuts and bolts, drill thru fiberglass and make a hole next to the mount location for the speed nut to access.
4) the side trim pieces will need either double sided tape, adhesive or counter-sinking bolts for the top part of the trim, the lower sections near the wide part of the piece can use the speed nut method.
5) the hoop wing on the bottom side has threaded inserts drill the side trim pieces where these holes align and attach using bolts and washers. (there are round circles where the should align in the fiberglass pieces). Do this with side pieces dettached, you can leave center one on the car.
6) Sand, Primer, Sand, Paint
7) Attach the hoop wing to side peices and place over top of mid section and your done.
Got the page... whats up brother... you wanna dump in a lot and have me handle shipping?
You know my schedule, which unfortunately doesn't grant time for pack/shipping, so I was thinking if any guys wanted stuff shipped they could maybe work out a deal with you to make it worth your while.
In the process keep a V1 for your self and anything else unsold. That is of course if you have use/interest for a V1 or any of the other parts.
Originally Posted by CyCloNe!
Hey Cpr I'll take the front side marker clears as well sir if they're still available.
I think they are the clears for the rear sides. I have to check when I go back Thursday.
Originally Posted by 67King
Hey, you don't have a spare driver's side door for your GTO, do you? I've got a 67 (hence the handle), but nowhere near 70% done.
No. Although parts for that are still easier to fin than for the 951.
Worse is that shortly I *may* be getting sidetracked with a Shelby GLHS Charger build, which means the ol Goat may still be at 70% until the winter.
Originally Posted by teamcrossworks
Can you please give a quick "how to" mount for the wing?
Thank you.
CyClonE pretty much nailed it. The only thing I would add is that when attaching the side rails I used adhesive which seemed to work better than a mechanical attachment for longevity.
I'll take a V1 splitter if any left. If anyone is meeting with CPR and is willing to receive and ship the splitter to me, I will take care of all costs + compensation for your efforts. Please let me know. Thanks.
Last edited by Powered By Porscha; 06-20-2012 at 09:03 PM.