DIY: Tial 38 mm wastegate bracket
#1
Burning Brakes
Thread Starter
Join Date: Oct 2005
Location: Montreal, Quebec + Ottawa, Ontario
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
DIY: Tial 38 mm wastegate bracket
Hi,
Just wanted to share how I secured my tial wastegate. I know many have run without any support to the tial with no issues but my suspension setup is uber stiff and the wastegate top got punctured from vibrating and somehow hitting the area surrounding the wastegate. Anyhow what I did was take an exhaust hanger and fold the 90 degree angle flat so I could slot it and bolt it up to the wastegate bracket. Not the sturdiest of brackets but I'm sure it takes some load off the exhaust and minimizes vibration. Check out the pic.
-Nick
Just wanted to share how I secured my tial wastegate. I know many have run without any support to the tial with no issues but my suspension setup is uber stiff and the wastegate top got punctured from vibrating and somehow hitting the area surrounding the wastegate. Anyhow what I did was take an exhaust hanger and fold the 90 degree angle flat so I could slot it and bolt it up to the wastegate bracket. Not the sturdiest of brackets but I'm sure it takes some load off the exhaust and minimizes vibration. Check out the pic.
-Nick