Intercooler Hard Pipes
#1
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Intercooler Hard Pipes
I've read a few old threads where a few members talked about GB's or even fabbing up intercooler hard pipes to sell... did anything ever come of that? I need something to replace my stock pipes and I don't want to spend over $300 on this part of my project... my parts list is already up near $2,000, and I'm not messing with a new turbo or MAF!
#6
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Thanks guys, I know all of the reasons not to do them, but I'm trying to clarify where several attempts at making lower-cost versions by rennlist members stands. There are a few threads discussing it, but I can't locate any where product was delivered and at what price. They probably died because they are too difficult & expensive to fab up, and that's fine, but I'd like to nail it down before I drop $$$.
Just tired of the bent pipe in there and want to dress things up a bit.
Just tired of the bent pipe in there and want to dress things up a bit.
#7
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Trending Topics
#9
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Thanks Jason. Are those stainless or aluminum?
Unfortunately, I'm not looking to vent the bypass valve to atmosphere, but those are good looking pipes!
Unfortunately, I'm not looking to vent the bypass valve to atmosphere, but those are good looking pipes!
#10