questions for the gurus.
#1
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2002
Posts: 14,447
Likes: 94
From: California
questions for the gurus.
This is not a for sale thread but I need to get some advise from the gurus.
I bough a car with some mods but the previous owner doesn't have any documentation, All I know is that it was tuned by SFR. It does have a T04 Im not sure what trim, some injectors that I don't have any idea how much do they flow, 3bar fpr, a UEGO 1000, mafterburner, LR maf and max chips, would you consider the above a whole package or could it use as individual parts without leaving some others obsolete.
please remember that these are items are not for sale, YET
TIA
Larts
I bough a car with some mods but the previous owner doesn't have any documentation, All I know is that it was tuned by SFR. It does have a T04 Im not sure what trim, some injectors that I don't have any idea how much do they flow, 3bar fpr, a UEGO 1000, mafterburner, LR maf and max chips, would you consider the above a whole package or could it use as individual parts without leaving some others obsolete.
please remember that these are items are not for sale, YET
TIA
Larts
#2
Just a long-shot, but maybe SFR recorded specifics of the components when they did the tuning. A call to Tim w/ the vin or previous owner's name may lead to something. At least then you'll know what you've got.
#3
i think you would make more money separating the whole thing. A package is great but you will need a guy with the $$$$ instead of people with $$$ for individual parts. Although it is getting close to christmas time so who knows what type of money people will have after
#7
Lart.. I was a precision Dealer way back when... If you can get a part number off the injectors.. Anything stamped in the plastic? they can tell you what size they are. easy to deal with.. or just post them here and I can tell you. hard to read the plastic label and it looks like different numbers on each!? They are the delphi brand injectors though.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
Last edited by 95ONE; 12-11-2010 at 04:38 PM.
Trending Topics
#8
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2002
Posts: 14,447
Likes: 94
From: California
Lart.. I was a precision Dealer way back when... If you can get a part number off the injectors.. Anything stamped in the plastic? they can tell you what size they are. easy to deal with.. or just post them here and I can tell you. hard to read the plastic label and it looks like different numbers on each!? They are the delphi brand injectors though.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
#9
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2002
Posts: 14,447
Likes: 94
From: California
I found your comment totally inaccurate, if I wanted to sell something I will post a FS threads and pictures like this, and yes THEY ARE NOT FOR SALE ON RENNLIST, PLEASE DON'T PM ME.
Last edited by lart951; 12-11-2010 at 05:23 PM.
#11
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2002
Posts: 14,447
Likes: 94
From: California
Lart.. I was a precision Dealer way back when... If you can get a part number off the injectors.. Anything stamped in the plastic? they can tell you what size they are. easy to deal with.. or just post them here and I can tell you. hard to read the plastic label and it looks like different numbers on each!? They are the delphi brand injectors though.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
That turbo looks like a turbonetice (Obviously) 60-1Hi Fi turbo. If it is a HI Fi housing, it should say hifi somewhere on the Housing or back plate.. I cant remember. T3 turbine. SHould be some numbers on the compressor. At least and A/R on the turbine housing. Some measurements of the inducer and exducer (small side / big side of wheel on compressor side.. opposite is true of the hot side. ) would clear things right up..mark the exact orientation before you do that though.. someone took a lot of time getting it angled just right!
it almost doesn't matter what brand the MAF is.. I wouldn't split the chipset up with the MAF. ASSUMING Russel programmed the chips for that specific MAF.
The # on the injector is 6065 17113841
#13
Thread Starter
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Joined: Dec 2002
Posts: 14,447
Likes: 94
From: California
#15