16v turbo dyno testing
#1
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Thread Starter
16v turbo dyno testing
Some videos from the dyno testing of the 16v turbo.
Testing is still ongoing - some details in the 3.0 thread
582hp on first pull.
http://www.youtube.com/watch?v=F2mVK3VQgZ0
http://www.youtube.com/watch?v=q4nevvbHJ9o
http://www.youtube.com/watch?v=el7_Kfv460g
Testing is still ongoing - some details in the 3.0 thread
582hp on first pull.
http://www.youtube.com/watch?v=F2mVK3VQgZ0
http://www.youtube.com/watch?v=q4nevvbHJ9o
http://www.youtube.com/watch?v=el7_Kfv460g
#7
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Thread Starter
Once the oil pump gets back and we get the final tuning done I will have time to shoot the ‘glory’ video!
For right now….its back to waiting!
I do wish I had the videos of the exhaust manifold glowing red hot....
Trending Topics
#8
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Thread Starter
#9
Nordschleife Master
Looks good!
What oil pressure did you have? Did the pump work fine at first since you did a full 15-16 psi sweep and then gradually produced lower oil pressure?
(good to know since a similar pump is on a certain other engine!)
What oil pressure did you have? Did the pump work fine at first since you did a full 15-16 psi sweep and then gradually produced lower oil pressure?
(good to know since a similar pump is on a certain other engine!)
#12
Addict
Rennlist Member
Rennlist Small
Business Sponsor
Rennlist Member
Rennlist Small
Business Sponsor
Thread Starter
Duke – I’ll shoot you some more info off line later today.
#14
So what is the deal with this engine? I guess I haven't been paying attention. Is the 16v motor becoming more popular for doing a turbo build in the 951's? I guess the 8v has its limits, but in the chevy world they seem to do fine with 2 valves a cylinder.
#15
Instructor
Nice! I like the concept Chris, but way to many valves! The plumbing for the dry sump is easier when the engine is not in the car, but the bragging rights are still the same... Should have thought of that
Anyway, good luck and congrats!
Anyway, good luck and congrats!