Fabspeed 4" exhaust
12-14-2010, 12:38 PM
#31
Drive-by provocation guy
Rennlist Member
Rennlist Member
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
I have the LR 5 inch on mine with pre-muffler and single wrap muffler. It sound great
I also have the original LR 4 inch. It's tiny next to the 5.
Big flow 4 looks great to.
The exhaust was easier to install than the stock system. It was about 1 hour to install the whole system.
Car was on blocks though already.
It's also thermal coated. Definitely recommend it and it looks good too.
Jason
I also have the original LR 4 inch. It's tiny next to the 5.
Big flow 4 looks great to.
The exhaust was easier to install than the stock system. It was about 1 hour to install the whole system.
Car was on blocks though already.
It's also thermal coated. Definitely recommend it and it looks good too.
Jason
12-14-2010, 06:56 PM
#32
Advanced
Join Date: Apr 2004
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Let's get the group buy going! I'm in for a 4" Big Flow, Thermal coated, O2 bung, waste gate tied in, Cat delete, magnaflow muffler, SS slash cut tip.
951Doc
http://www.project944turbo.com
951Doc
http://www.project944turbo.com
12-15-2010, 10:20 AM
#33
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
We are willing to do an "Exhaust" group buy. From our 3" to our 5". Doesn't matter what configuration,
whether wg dump, add in a cat, add in a WG dump muff, coated, whatever.... If it's a 951 exhaust, no matter how it's configured, the discounts would apply.
Somone would need to step up, organize the group, get the permissions, and put this together.
That person would get some additional benefit or deal to be determined. Free Thermal coating or something like that for example.
It's up to you guys. We are up for some fun.
If you decide to, I would recommend starting a new thread. Our apoligies to the original poster. We
didn't try to hijack this.
whether wg dump, add in a cat, add in a WG dump muff, coated, whatever.... If it's a 951 exhaust, no matter how it's configured, the discounts would apply.
Somone would need to step up, organize the group, get the permissions, and put this together.
That person would get some additional benefit or deal to be determined. Free Thermal coating or something like that for example.
It's up to you guys. We are up for some fun.
If you decide to, I would recommend starting a new thread. Our apoligies to the original poster. We
didn't try to hijack this.
__________________
Mike or Dave Lindsey
www.lindseyracing.com
U.S. 1-877-943-3565
Other 1-405-947-0137
Mike or Dave Lindsey
www.lindseyracing.com
U.S. 1-877-943-3565
Other 1-405-947-0137
12-15-2010, 10:32 AM
#35
Drifting
Join Date: Apr 2002
Location: Atlanta
Posts: 2,179
Likes: 0
Received 0 Likes
on
0 Posts
I love my catless LR 4" steel system with the Magnaflow muffler. Dave was very helpful with getting me set up right. I run a K27/6 in my car and after installing the 4" system I noticed 1 bar of boost coming about 300 to 500 rpm sooner than with the stock exhaust with cat. No before or after dyno, but I included MAX chips good for 18psi and and tuned my LR Stage II MAF accordingly after installing my exhaust and I think it's safe to say I'm seeing at least 20-30 more hp with these mods on high boost. I would say if you have a bigger hotside than stock then you'd reap even bigger benefits. Sounds great!
12-15-2010, 01:40 PM
#36
Rennlist Member
Thread Starter
Join Date: Sep 2008
Location: Northern NJ
Posts: 779
Likes: 0
Received 0 Likes
on
0 Posts
Seriously...thanks for the thought!
I was originally attracted to the Fabspeed exhaust because of their video clip showing or rather demonstrating the sound of their 3 & 4 inch exhausts. Sound does matter (it might also be a good selling tool for you too).
I would love to organize a group buy but I am not yet in a position to buy... unless for some crazy reason one of my kids puts it down on their Christmas list.
Nah... won't happen.
