Control arms - High Strung 44
12-01-2011, 07:59 PM
Burning Brakes
Join Date: Jun 2007
Location: San Diego
Posts: 866
Likes: 0
Quote:
Originally Posted by
Brian Broderick
Still can't believe that many people and stuff can fit on a truck. Where was that picture taken?
Somewhere in Africa. A friend sent it to me and I thought it was hilarious. Try and count them!
02-25-2013, 09:35 AM
Rennlist Member
Join Date: Jun 2002
Location: Ft. Myers, Florida
Posts: 2,527
Glad to report High Strung 44 is back again for 2013 as a sponsor for the 944 Cup race series.
http://www.44cup.com/sponsors
02-26-2013, 03:23 PM
Rennlist Member
Join Date: Aug 2007
Location: Houston, Texas
Posts: 6,305
They really need to get a web site or post their email somewhere.
02-26-2013, 04:15 PM
Race Car
Join Date: Oct 2002
Location: KC, MO
Posts: 3,638
Likes: 0
How much are the control arms?
02-23-2015, 12:38 PM
Rennlist Member
Join Date: Jun 2002
Location: Ft. Myers, Florida
Posts: 2,527
Fir more info on the High Strung 44 control arms, here is a link:
www.facebook.com/highstrung44#
02-26-2015, 11:08 PM
Three Wheelin'
Join Date: Feb 2003
Location: Santa Barbara, CA
Posts: 1,665
To those who run the High Strung 44 arms:
How much caster adjustment is possible with the threaded rod adjustment of these arms?
I am actually quite pleased with my early steel arm/geometry correcting ball joint pin setup as shown in other threads, but a weak point of the early steel arms is the lack of caster adjustability. I can only get ~3.5 degrees max and I'd like more.
Thanks,
Chris
02-28-2015, 12:50 AM
Rennlist Member
Join Date: Jun 2002
Location: Ft. Myers, Florida
Posts: 2,527
Quote:
Originally Posted by
Droops83
To those who run the High Strung 44 arms:
How much caster adjustment is possible with the threaded rod adjustment of these arms?
.........................
Thanks,
Chris
Quite a bit. Could go another 3/8" to 1/2" safely
03-03-2015, 12:18 AM
Three Wheelin'
Join Date: Feb 2003
Location: Santa Barbara, CA
Posts: 1,665
Quote:
Originally Posted by
944Cup
Quite a bit. Could go another 3/8" to 1/2" safely
Do you know how much positive caster is possible, measured in degrees?
03-03-2015, 06:48 PM
Rennlist Member
Join Date: Jun 2002
Location: Ft. Myers, Florida
Posts: 2,527
Quote:
Originally Posted by
Droops83
Do you know how much positive caster is possible, measured in degrees?
Cannot help you there.
44 ,
944 ,
aarms ,
arm ,
arms ,
biceps ,
control ,
custom ,
fabrication ,
high ,
highstrung ,
highstrung44 ,
lower ,
porsche ,
strung