When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For 100.5mm bore, 9.7:1 (perfect for E-85 or big, low boost turbo) and meant for a 2.8 stroker motor. Have Carrillo Rods for this setup as well if needed
Are these pistons from the Andial 2.8 stroker kit? I thought those had lower compression?
Andial's kit began with 8:1 pistons because it was developed years and years ago, with today's technology however most turbo engines are no less than 8.5:1. I believe they marketed the 8:1 and never the 9.7:1
Andial's kit began with 8:1 pistons because it was developed years and years ago, with today's technology however most turbo engines are no less than 8.5:1. I believe they marketed the 8:1 and never the 9.7:1