JC951

Going down to European Performance Labs monday morning to dyno the car...again. The first time I got the car dyno'd it did 332.9 hp and 340 ftlbs on a dyno dynamics dyno at 16psi. I figure that in the future I will be doing upgrades and having Tony at EPL tune the car that I should get a baseline of what I have now. It will be on an awd mustang dyno.

Supposedly the car has a custom chip installed. Reworked head and crank, lightened flywheel, 968 6spd tranny with lsd, intercooler hard pipes and maf upgrade. Supposedly the turbo is k26 with a 27 impeller and a #10 hotside. I just did the Fabspeed cat bypass pipe and have had the Broadfoot racing catback exhaust.

any guesses from the peanut gallery? Gentlemen...start the pool

333pg333

So Justin, are you saying that all that stuff was in it the first time it was dyno'd except the exhaust changes?
So won't it dyno pretty much in the same vicinity?

JC951

well...i'm not too sure if the other place used any correction factors...plus this is the dyno that my car will be tuned on whenever i go to the stand alone system

Adonay

So the change is a free flowing exhaust on this run compared to the last were you had the same mods?

JC951

pretty much...plus i trust Tony more than this other shop that dyno'd it....so i'm hoping for more accurate numbers and for the baseline for the future tune

JC951

So i neglected to post anything up. The car made 280 hp and 320 tq at 16#'s. Peak power was made at 4200 rpm. Seems like the hotside is a #8 from the spool characteristics. I think future plans will be a built block with a gt30r. Maybe make it a 2.7 with a Link G4 engine management system and anything else that will go along with that build...but that will be years down the road. I need to learn how to drive this car on the track first.

Josh B

Hi Justin - that torque number is really strong. Can you scan and post the curve?

JC951

I havent gotten the printout yet...i should be going down to EPL on thursday or tomorrow depending to check out a customers 944 turbo...so i'll get a print out then and post one up

JC951

Haven't been able to get down to EPL to get the dyno sheet...but my friend did edit the video...HD version will be up on vimeo tomorrow

http://www.youtube.com/watch?v=iEQ_hgik0rY

reno808

very nice video

PorscheDude1

Nice video, but that music??

CPR

Those are damn good numbers from a 26/8

JC951

wasnt my choice for music...i'm just happy about the video

Duke

I thought the German hip-hop music was suitable for the video

reno808

I thought the music was good. btw what is the artist?