Alex's 951 Build Thread (updated 11/4/10)
02-27-2010, 01:49 AM
#1
Rennlist Member
Thread Starter
Alex's 951 Build Thread (updated 11/4/10)
Just ordered an FMIC today, waiting on the machine shop to make my wastegate adapters, and widefire head gasket is in the mail. Have to order some copper gaskets too.
Planning on having it all put together over my spring break in two weeks.
Tease pic of what's collected thus far:
Since my camera (cell phone) is ****ty, here's a list:
*Vitesse Stage 2 (early) with V-Flex and boost solenoid
*LR Vacuum Lines
*SS Braided Brake Lines
*LR SS Fuel Lines
*Bosch 3bar FPR
*JGS Precision Turbo 40mm Wastegate
*Greddy Type S BOV and Recirculating Flange
*Cooling Mist Methanol Injection
*AEM UEGO Wideband
*Autometer CF Boost Gauge
*K&N Filter
*MSD 6AL
*Rennbay Exhaust Hardware Kit
*Lots of new gaskets, timing belt, rod bearings
*D9 Fixed Headlights
*Projectors with HID's to replace square D9 lights
*Bosch 044 Fuel Pump
*#72 Injectors
...and probably a few other things I'm forgetting sitting out in the garage. Not to mention all my stock parts that I've been powdercoating.
Planning on having it all put together over my spring break in two weeks.
Tease pic of what's collected thus far:
Since my camera (cell phone) is ****ty, here's a list:
*Vitesse Stage 2 (early) with V-Flex and boost solenoid
*LR Vacuum Lines
*SS Braided Brake Lines
*LR SS Fuel Lines
*Bosch 3bar FPR
*JGS Precision Turbo 40mm Wastegate
*Greddy Type S BOV and Recirculating Flange
*Cooling Mist Methanol Injection
*AEM UEGO Wideband
*Autometer CF Boost Gauge
*K&N Filter
*MSD 6AL
*Rennbay Exhaust Hardware Kit
*Lots of new gaskets, timing belt, rod bearings
*D9 Fixed Headlights
*Projectors with HID's to replace square D9 lights
*Bosch 044 Fuel Pump
*#72 Injectors
...and probably a few other things I'm forgetting sitting out in the garage. Not to mention all my stock parts that I've been powdercoating.
Last edited by alxdgr8; 11-04-2010 at 04:54 PM.
02-27-2010, 01:54 AM
#3
Rennlist Member
Thread Starter
02-27-2010, 09:11 AM
#5
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Alex, I have no idea where you got your used parts from. I see a "Red Flag" in your picture, drop me a email.
02-27-2010, 12:19 PM
#7
Rennlist Member
Trending Topics
02-27-2010, 01:52 PM
#8
Drifting
Damn...wish my list of things to install was as far along as yours. I just have my VS3R Turbo and Piggy back. I think I need to get the ball rolling! 
Can't wait to see when it's done!
Can't wait to see when it's done!
02-27-2010, 05:19 PM
#10
Rennlist Member
Thread Starter
02-27-2010, 05:42 PM
#12
Pro
Join Date: Dec 2009
Location: Northern VA
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
I want those headlights please tell me where you got those. Man my garage is cold too. Over the past 2-3 months i froze and installed all my junk like you have there. kokeln V turbo, 72's, venturi delete, custom IC pipes with AMS blow off valve, saikoumichi catch can, AC delete, MSD coil, plugs, wires, T belt, fuel vapor recovery delete, adjustable FPR, wrapped turbo crap, hitachi 90mm maf with true 3 inch intake, and fresh vac. lines. Now about 1/8th of the way done with the car. lol good luck dude
02-28-2010, 06:10 AM
#15
Rennlist Member
Thread Starter
I want those headlights please tell me where you got those. Man my garage is cold too. Over the past 2-3 months i froze and installed all my junk like you have there. kokeln V turbo, 72's, venturi delete, custom IC pipes with AMS blow off valve, saikoumichi catch can, AC delete, MSD coil, plugs, wires, T belt, fuel vapor recovery delete, adjustable FPR, wrapped turbo crap, hitachi 90mm maf with true 3 inch intake, and fresh vac. lines. Now about 1/8th of the way done with the car. lol good luck dude