When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
For those who arent board of this tread by now I managed to do a few fun things today. I started by color sanding the passenger side of the car then buffed it up (a polishing machine and the correct polish is soooooooooooo much easier than doing it by hand ) I was about to start the drivers side when I thought I should do something a bit more gratifying. So I cut a few graphics and applied them and then trial fitted the splitter for the first time. Whilst it is no where near finished as I need to do the checker design to blend the fender to the door you start to get the idea!
Do you think that it will stand up as is for racing or do you plan on reinforcing the underside. I broke a bunch of the AIR splitters last year and need make a change.
I think I am going to modify it and add some balsa underneath. At the end of the day its fiberglass so it will not stand up well to a meaty hit. Lets see.