CEP Billet Turbo mount and Tial Turbo (PICS)
#31
Well from some one who has fabricated left hand mount and programmed a machining center...
RRRRRRRRREEEEEEEEPECT!!!
my povo one was much eaiser as there is no sterring shaft there... but it stil took me at least an intire day
RRRRRRRRREEEEEEEEPECT!!!
my povo one was much eaiser as there is no sterring shaft there... but it stil took me at least an intire day
#32
Banned
After reading this thread and your posts - Rolex may not have to. It may be my call.
Derek, feel free to PM me your role in all this - for frankly - if you are not representing CEP, you sure act like it in public - in this thread and your posts. And yep - I posted this:
Announcement a long time ago...
Have a nice evening,
John
Derek, feel free to PM me your role in all this - for frankly - if you are not representing CEP, you sure act like it in public - in this thread and your posts. And yep - I posted this:
Announcement a long time ago...
Have a nice evening,
John
#33
Rennlist Member
....never saw any of this coming.....
#36
Banned
Hey guys..!
I'm headed off line for the evening - but, before I sign off - I wanted to say this....
There are times when a thread takes an unexpected turn - and some of the folks are left scratching their heads. But - it shouldn't detract from the OP content, and much of the content in this thread. So - right up front - I apologize for taking a "sharp left turn"...
But - here is something to think about. I received a sincere and professional PM from Derek a minute ago (Derek, you'll get a private reply tomorrow, OK? I'm a bit beat tonight, as it;'s been a day from "heck" ) and you know what? That's simply what this site is all about...
To Derek - simply - in public - right up front - Thank you.... I mean that....
And to the rest of the folks..?
Carry on and have a great evening!
My best to all,
John
I'm headed off line for the evening - but, before I sign off - I wanted to say this....
There are times when a thread takes an unexpected turn - and some of the folks are left scratching their heads. But - it shouldn't detract from the OP content, and much of the content in this thread. So - right up front - I apologize for taking a "sharp left turn"...
But - here is something to think about. I received a sincere and professional PM from Derek a minute ago (Derek, you'll get a private reply tomorrow, OK? I'm a bit beat tonight, as it;'s been a day from "heck" ) and you know what? That's simply what this site is all about...
To Derek - simply - in public - right up front - Thank you.... I mean that....
And to the rest of the folks..?
Carry on and have a great evening!
My best to all,
John
#40
Rocket Scientist
Rennlist Member
Rennlist Member
If at first you don't succeed, try, try again.
Acutally, I was turning over a new leaf referring to my specific vendor bashing. The other leaf that needs turning (talking up a non-supporting vendor), I'm still working on. One leaf at a time, Chris.
Acutally, I was turning over a new leaf referring to my specific vendor bashing. The other leaf that needs turning (talking up a non-supporting vendor), I'm still working on. One leaf at a time, Chris.
#44
Drifting
Well the important thing is you are trying! lol Baby steps!