Lorax

For those of you using vitesse, the smt-6 supports boost control and it works great

beebone

For all ele. boost controller, you have to bypass the cyclinder valve first, otherwise, the boost controller won't work!!!!!! I'm using HKS EVC V which installed by previous owner, the set up is.

- the hose from CV to wastegate
- the hose from CV to banjo bolt
- the hose from CV to J-boot

Those shd be disconnect and block well. So, Vitesse mentioned that if using their chip, the CV shd be bypassed becuae the chip ultilize the 3rd party boost controller to raise the boost level

951_RS

This is about the same for any boost controller.
anyways, I prefer my mbc to be complete honest. I don't need adjustable boost as if I'm going to be full throttle I don't need a lesser amount at any time or else I can just use partial throttle to receive the lesser power.