X-post WTB: 951 oil cooler setup
07-07-2009, 01:26 AM
#1
Rainman
Rennlist Member
Rennlist Member
Thread Starter
X-post WTB: 951 oil cooler setup
Anyone parting cars or upgrading setups, I'm looking to get a turbo external oil cooler setup. At the least I'd like the finned cooler itself along with the lines and an oil filter housing would be nice so I wouldn't have to fab up one of my own with a spare NA housing.
Looking to get this as CHEAP as possible, don't care about mileage or dirtyness so long as it doesn't leak. Bent fins, missing paint, whatever, so long as it still holds oil and cools it off that is good enough.
Whatever you have let me know and maybe we can work something out.
Looking to get this as CHEAP as possible, don't care about mileage or dirtyness so long as it doesn't leak. Bent fins, missing paint, whatever, so long as it still holds oil and cools it off that is good enough.
Whatever you have let me know and maybe we can work something out.
Last edited by V2Rocket; 07-09-2009 at 01:32 AM.
07-08-2009, 02:33 PM
#3
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Anyone parting cars or upgrading setups, I'm looking to get a turbo external oil cooler setup. At the least I'd like the finned cooler itself along with the lines and an oil filter housing would be nice so I wouldn't have to fab up one of my own with a spare NA housing.
Looking to get this as CHEAP as possible, don't care about mileage or dirtyness so long as it doesn't leak. Bent fins, missing paint, whatever, so long as it still holds oil and cools it off that is good enough.
After checking parts FS threads the general going price for this setup is around $70 so I'd like the package to be about that much (not counting shipping). But whatever you have let me know and maybe we can work something out.
Looking to get this as CHEAP as possible, don't care about mileage or dirtyness so long as it doesn't leak. Bent fins, missing paint, whatever, so long as it still holds oil and cools it off that is good enough.
After checking parts FS threads the general going price for this setup is around $70 so I'd like the package to be about that much (not counting shipping). But whatever you have let me know and maybe we can work something out.
07-08-2009, 02:39 PM
#4
Race Director
I think he means just the cooler and lines (I hope). Every housing I have sold gets over 100 as well. Lines and cooler around 50-75 depending on condition.
07-12-2009, 01:04 AM
#7
Instructor
Join Date: Nov 2007
Location: Chicago burbs
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to sell my Kiss setup pretty soon. the core is slightly bent because the PO installed it lines facing down and then went off track. i'll send you some pics
Trending Topics
07-12-2009, 12:45 PM
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
My crystal ***** says that Spencer will either spend more money, turning his 944 NA, into a turbo, than the cost of a well sorted turbo, or he will not finish before he is older than Sam Grant is now!
Don't flame me. I'm just telling you what the crystal ball said!
Don't flame me. I'm just telling you what the crystal ball said!
