advices needed on my build!!!!!!!!!!!!!! pictures
05-30-2009, 09:21 AM
#31
Drifting
Join Date: May 2006
Location: Melbourne
Posts: 3,481
Likes: 0
Received 0 Likes
on
0 Posts
well I would say use turbo forged rods and spend the carrillo money on other little refinements' like
taking weight from the crank and flywheel
port job valve job crank scraper windage tray .
NA cam change out ... over bore a waste of time and money also as alusil is a hassel and there are very few cubes to be had
taking weight from the crank and flywheel
port job valve job crank scraper windage tray .
NA cam change out ... over bore a waste of time and money also as alusil is a hassel and there are very few cubes to be had
