Paseb

Hi everyone, well today, my mecano and I finished the stuff to put the motor out of the car, it came out easily,
im really happy of what we did,
big thanks to my mecano Patrick

next step: wash the engine bay, i will jack the front with my fork lift, then use pressure washer and degreaser

DanR

good job! how long did it take to complete start to finish?

Richgreenster

It looks like you did a great job!
What are your plans?

Tom M'Guinn

Congrats. I cleaned my up mostly with Simple Green and a brush...

Charles A. Toupin

Nice Job Seb!

C.

Darwantae951

Careful with the pressure washer, it can be pretty harsh on 23 year old wiring and connectors. Be sure to post a good before and after shot! I want to pull my engine JUST to do this same thing!

400hp944

Nice work. I hope you have better luck getting those oil cooler lines off the oil cooler than I did. I had to cut them off, heat them up in a vise. Expensive too. Be sure to attach the new lines to the motor before installing it. Major bitch to get them on with the motor in the car.

Engine bay is pretty clean already. Should be real nice when you're done.

What are the big plans???

Paseb

thx everyone, i will give much update as I can

well, for the motor,

lindsey super 61 turbo,
lindsey maf stage 2
full 3inch exhaust from turbo, fabspeed and sfr
tial wasgate
MBC
Mafturburner and uego 2000 wideband
big red brakes
boost gauge, aem afr gauge
SS braided fuel lines
probably more, but im forgotten

body:
new boxster wheels
968 door handles and mirrors
968 wing
front lip
bumper pads removal


and some maintenance,
timing belt, waterpump, front engine seals, steering rack rebuild, ps reservoir, ps lines, oil cooler lines
kiss oil cooler


looks like it

Sysgen

Glad you got the engine out Seb.

You have so much to do, you won't have time to drive the car this summer

What are you plans with your car, do you plan to track it?

Paseb

dont worry I will , haha
im doing the wash tomorrow and tearing apart the motor too


well, i will head up to tremblant 3 times this summer,
i received jim russel courses for my birthday

Charles A. Toupin

Hey Seb! Why don't you come to Rennsport event with us? At least, come meet us there! The dates are on our website. Bob will give you a ride

I am really looking forward to see this car in person, with all those upgrades, it is going to be nice. Did you already bought all the parts?

I just bought a uego AFR gauge yesterday and an EGT gauge too! I have the the boost gauge now temporarely installed on the turn signal lever hhmm hmmm, because the cage is currently being built. Photos to come in 10 days or so...

PM sent for the Jim Russell courses...

C.

ritzblitz

Nice work so far.

You can polish and wax the engine bay too dont forget

Paseb

I will,

Paseb

charles, i will go take a look for sure

yup all the parts are bought except some parts of the maintenance

Paseb

some pics of the washing setup, i realised that i forgot to take new pics after the wash...









some parts that are going to the powdercoat guy