turbo water pump wire cracked
#2
Race Director
A tight wrap of Scotch 33+, followed with a small controlled application of 3M "liquid tape".
Allow to set up at least 30 minutes prior to re-installation.
Will you hurry up and get that thing back together!
Allow to set up at least 30 minutes prior to re-installation.
Will you hurry up and get that thing back together!
#4
Race Director
The repair option I listed will work fine and last for quite awhile. I forgot to add to clean the wire back about 4 inches with rubbing alcohol/wipe/and allow to dry....THEN apply the 33+ and liquid.
#6
Drifting
Thread Starter
Join Date: May 2008
Location: New Paltz, NY
Posts: 2,364
Likes: 0
Received 0 Likes
on
0 Posts
#7
Race Director
Trending Topics
#10
Rennlist Member
#12
Nordschleife Master
I would only use the solder idea if the wire is partially broken or weak from being worked back and fourth too much (work hardened). Otherwise a drop of silicone or liquid tape as suggested.
#14
Rennlist Member
1. why do you have a gold bracket?
2. real smooth with the fake the ID
3. Junk that thing your going to be chasing shorts for as long as you have that pump. I think i have one you can use
2. real smooth with the fake the ID
3. Junk that thing your going to be chasing shorts for as long as you have that pump. I think i have one you can use
#15
Drifting
Thread Starter
Join Date: May 2008
Location: New Paltz, NY
Posts: 2,364
Likes: 0
Received 0 Likes
on
0 Posts