carreracoupe997

What lenght hypercoils should I use? 1986 951 Track Use Only. Bilstein Escort Cup Coilovers all around. No Torsion bars. Currently has 400/200 but need to switch to around 500/650. I need recommendations on the length. Thanks for your help.


Steve

hp18racer

8" front, 7" rear should work.

Trucho-951

Also, the front suspension travel is very limited in the 951, try setting the upper mount as high as possible, for example use raised camber plates like these kokeln:

http://www.kokeln.com/raised_camber_plate_kit.php

samluke

I have a range of new and used Hypercoil and Eibach springs for sale if you need any.

eniac

I might have asked before but do you have anything close to these?

450#lb ...10" L 2.5" dia.

or

900lb ...8" 2.25" dia.?

samluke

I have 2.5's in 8" 500,600,625,650 and 10" in 300,550,650.

The highest I have in 2.25" is 8" 650's and 800's

Van

If I recall, you can use 8" long springs front and rear with the Bilsteins... but I'm not 100% positive.

eniac

How much for two 10" 550 and two 2.25" - 8" 650?

carreracoupe997

Richard, I am interested in the 2.5" 8 inch 500lb springs. Do you have a 650lb 7 inch 2.25" for the rear?

samluke

Springs are $80/pair or $150 for two pairs. Unfortunately I only have 2.25 8's 650 left.

carreracoupe997

Richard, I would like to buy the 2.5 8 inch 500 lb springs. Paypal, mail you a check? you tell me. Also I may want the 2.25 650's but I need to go over to where I am rebuilding my car and measure. Thanks

Weston Dillard

As long as we are cleaning out the garages here, I have the following that I'll sell for the same price Richard is asking. I don't think we overlap, but if we do, buy his first.

All are 8":
2.5 350, 400
2.25 400, 500

West