reno808

While working on Anders and Alan's car we recieved a distrubing phone call from a rennlister by name of VWVORTEX aka (cigga weed)................................................................... ...............................










He filled up his gas tank and was complaining of a awful raw fuel smell. So it seems that he has a gas leak....... We recall that ciggga weed has a big bass kicka. So we ask what were the length of the sheet metal screws that he used to bolt down the kicka??

In other words vwvortex bolted his stero equipment to the gas tank.

I guess the 93 oct is a good ground.

shaheed

i recommend dropping the engine (literally).

porshhhh951

bwahaha.

Tom M'Guinn

I guess his fuel ratio will be well "tuned"...

Cory9584

lol, hopefully he didnt screw the ground to the tank aswell. That could be really bad

Lorax

I've heard of this happening before, hilarious

MPD47

xsboost90

the car that Judson bought and i parted out had that also. I noticed the holes in the rear deck and thought i hope they didnt go into the tank- when i pulled it out gas came pouring out of four holes in the top of the tank. Priceless.

Stuttgart996

yea not gonna lie this is probably one of the dumbest things i have ever done... well that and rolling my car off the trailer.

dillon410021

I wonder if mine gas take has a hole in it because It really smells if your fill it over half a tank

tconn

I've got a good tank from an 86 if you need.

Ski

Whats a sub worth in fuel pressure?

DDP

I love how you avoid the engine hoist threads like a plague yet as soon as you can poke fun at someone else, you're all about it. lol

lart951

Well, reno and tool are big wussies, why do you think tool doesn't post anymore because he is affraid of me.

kevincnc

I did the same thing to my VW bug mounting an equalizer under the dash when I was 17. My uncle took away my key to his shop when he found out that I welded the hole in the tank shut inside the building. In my defense I did remove the tank, emptied it, rinsed it out with alcohol, and stuck an air hose in it to dry it our for about an hour, but I guess welding on a used gas tank isn't that smart.