Anyone have any tial wastegate springs lying around?
#1
Burning Brakes
Thread Starter
Join Date: Oct 2005
Location: Montreal, Quebec + Ottawa, Ontario
Posts: 832
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi,
I just figured out I must be running a 0.8 bar spring. I can hit 15 psi on my ebc on acceleration but that figure promptly hits 10-11 psi thereafter. Anyone have some 1.2, 1.3 bar springs?
-Nick
I just figured out I must be running a 0.8 bar spring. I can hit 15 psi on my ebc on acceleration but that figure promptly hits 10-11 psi thereafter. Anyone have some 1.2, 1.3 bar springs?
-Nick
#2
Burning Brakes
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Open it up to make sure. 0.8bar is the large red spring. To get 1.2bar you need to add the small red spring. http://www.tialmedia.com/documents/w3_tial_38_sp.pdf