project951

does anyone know what kind of after market waste gate will bolt up to my stock piping. been looking at tial 44mm waste gates but dont know if it will bolt up it looks like it will

2bridges

tial will require adapter plates.

most go tial 38 aprox $199 + adapter plates $179-$199

Techno Duck

http://us.europartsetc.com/

Goto the left under performance.

Alternatively you can get them from SpeedForceRacing.

http://www.speedforceracing.com/prod...wastegates.php

xsboost90

lindsey and paragon-products also carry direct bolt on units. I have the tial 38 w/ adapters.

Netrunner09

second the tial with adapters, transforms the car.

reno808

3rd that b*tch

Depape

Yep, Tial 38 FTW

RPHARRIS

The Tial 41mm will bolt to the two piece crossover with no adapter plates or modifications. You will however need to fabricate a 1.5" OD pipe to tie back into the exhaust.

SD Porsche Fan

I went with the Lindsey unit because it bolts up directly like stock. I've been happy with it so far.

RPHARRIS

Depape

ooooorrrrr you could just leave it open and dump it to atmo.

IPSC

Holy cow, I am guessing that is the F41? Does it bolt up to both pipes sans adapters?

IPSC

333pg333

Well I have the Lindsay unit after having the Tial 38 and it jamming and seeing my boost go to over 2 bar!!! Also the Tial doesn't have much meat on the sides of the 'diamond' flange to effect the best seal in my mind. Maybe the larger one is better in that regard. There's 3 of us down here using the Lindsay with no probs. I have no affiliation with either brand.

Olli Snellman

I use one of these:

333pg333

What's that Olli? Looks like a Lindsey or version of it? Did you get my email reply to your PM?