Need to borrow tools for timing belt/roller....
#1
Pro
Thread Starter
Join Date: Sep 2006
Location: San Antonio, TX 78154
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Need to borrow tools for timing belt/roller....
Well I thought sharky47(Dan) was going to send me the tools but I can never get a hold of him and I know he is busy.
Anyone willing to let me borrow the tools to do a timing belt/roller job???
I will pay for shipping both ways and give you a little extra for the time I have it. I have never done this job before so I would need the tools for about 3 weekends (Just in case buisness comes up)
Pref someone around San Antonio so you know Im not gonna jack the tools.
I would also need the flywheel lock if someone has one so I dont ruin my new head.
Anyone willing to let me borrow the tools to do a timing belt/roller job???
I will pay for shipping both ways and give you a little extra for the time I have it. I have never done this job before so I would need the tools for about 3 weekends (Just in case buisness comes up)
Pref someone around San Antonio so you know Im not gonna jack the tools.
I would also need the flywheel lock if someone has one so I dont ruin my new head.
#4
Pro
Thread Starter
Join Date: Sep 2006
Location: San Antonio, TX 78154
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
autozone sells all the tools needed???
Anyone else that could help me out? (Im strapped for money until after I pay taxes on my house and myself since Im a independent agent and get screwed by the gov)
Anyone else that could help me out? (Im strapped for money until after I pay taxes on my house and myself since Im a independent agent and get screwed by the gov)
#5
Site Sponsor
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Aug 2002
Location: A great big building in the woods, FL.
Posts: 6,527
Likes: 0
Received 4 Likes
on
3 Posts
Give me a ring tomorrow, I have some seconds of the wrench sets that are less than perfect cosmetically. $12 shipped for the set of 2 if you want them.
352-466-0219
352-466-0219