3.0 16v turbo blown head gasket pics
#16
Racer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
ST, missed your question on hotside, have a #8 from Innovative turbo, not sure whos cast they use or if its their own. It has a stage 5 turbine wheel, I'm considering to go to a #10 as the back pressure from my current setup is high, I did measures at every 1000rpm pre turbine and pre cat, just cant locate the table at the moment I'm moving house.
Its still a 2.5" downpipe at the moment and stock S2 exhaust so that is where a lot of the back pressure is coming from, so thats booked in to be upgraded to 3.5" DP and 3.5/3.0 exhaust, but wont happen for a month or so.
Once I test after that I'll decide on the #10.
rgds
mike
Its still a 2.5" downpipe at the moment and stock S2 exhaust so that is where a lot of the back pressure is coming from, so thats booked in to be upgraded to 3.5" DP and 3.5/3.0 exhaust, but wont happen for a month or so.
Once I test after that I'll decide on the #10.
rgds
mike