Oil Pressure issues

Reply Subscribe

Thread Tools

Search this Thread

07-03-2008, 03:34 PM

#16

Spidey944

Rennlist Member

Thread Starter

Join Date: Aug 2007

Location: Phoenix, AZ

Posts: 3,481

Likes: 0

Received 4 Likes on 4 Posts

I changed mine the garage last night, only lost maybe 6oz. of oil. Just a guess, but it was not much! Could've caught it all with a few rags.

Reply Like

07-03-2008, 03:52 PM

#17

Darwantae951

Join Date: Dec 2004

Posts: 11,034

Likes: 26

Received 25 Likes on 21 Posts

Quote:

Originally Posted by toddk911

I assume it can be easily changed while changing the oil?

Well you have to kinda snake your way up there and I can't remember if the oil pressure sender gets in the way. I had mine out before I pulled the OPRV.

Reply Like

07-03-2008, 03:55 PM

#18

Spidey944

Rennlist Member

Thread Starter

Join Date: Aug 2007

Location: Phoenix, AZ

Posts: 3,481

Likes: 0

Received 4 Likes on 4 Posts

I used an 8" 3/8 drive extension w/17mm socket. Had the wheel off and only the right side of the car jacked up. Had it done in 10 minutes. No clearance issues.

Reply Like

07-03-2008, 04:01 PM

#19

Darwantae951

Join Date: Dec 2004

Posts: 11,034

Likes: 26

Received 25 Likes on 21 Posts

Quote:

Originally Posted by SpideySlave944

I used an 8" 3/8 drive extension w/17mm socket. Had the wheel off and only the right side of the car jacked up. Had it done in 10 minutes. No clearance issues.

There ya have it!

Reply Like

07-04-2008, 12:51 AM

#20

xsboost90

Rennlist Member

Join Date: Jan 2003

Location: Burlington ky

Posts: 15,223

Likes: 2

Received 7 Likes on 7 Posts

i need to jack mine up and align the housing- i think thats why mine stuck open at the track. I bought a one piece updated OPRV but the damn seal in the middle was bad.

Reply Like

Reply Subscribe