968 rockers installed on 951. Now with a picture.
11-12-2007, 07:19 PM
#17
Race Director
11-13-2007, 04:38 PM
#18
Burning Brakes
Join Date: Mar 2003
Location: Mobile,Al
Posts: 1,085
Likes: 0
Received 0 Likes
on
0 Posts
I would definitely like to see some pics. I have a set of f.g. ones I bought from another lister a few months ago. I figure about 10-15 hours to make them fit like I want them too. I'm curious how yours look on the car. Mine fit decently, but I'm going to trim them so they don't wrap into the door jamb. Lorax, where did you get yours?
11-14-2007, 07:32 PM
#23
The Impaler
Rennlist Member
Rennlist Member
Thread Starter
Its not really that different than other rocker panels you can get. Just the thing that comes up at the wheel, but my car original had a vinyl that went there. I think with an AIR splitter and the euro bumper sitting next to me it will look pretty sharp.
11-14-2007, 08:22 PM
#25
Drifting
Join Date: Mar 2004
Location: Eville, IN
Posts: 2,372
Likes: 0
Received 0 Likes
on
0 Posts
I dont know... I mean dont get me wrong your car looks very very sharp. But the rockers almost make you take your eyes off the car and go straight to them. They are just big down there and they are screaming LOOK AT ME.
11-14-2007, 09:07 PM
#27
Nordschleife Master
The one thing i dont like about the 968 rockers on the 944 is i think they hang way to low in the rear. I will probably be scalded for saying this but i think if you had something similar to the hideous euro style rear valance (with the slots in it) mounted on the rear it might actually complete the look.
Another thing i was thinking, if it was possible to maybe cut an inch or two from the bottom edge. Basically i think if they did not hang down so low they might fit the profile of the car a little better.
Ill admit, i like the look alot, especially the cue of the 'shark fin' from the '80s 911 stone guards, just i personally think they hang down a bit to low.
Another thing i was thinking, if it was possible to maybe cut an inch or two from the bottom edge. Basically i think if they did not hang down so low they might fit the profile of the car a little better.
Ill admit, i like the look alot, especially the cue of the 'shark fin' from the '80s 911 stone guards, just i personally think they hang down a bit to low.
11-14-2007, 09:17 PM
#28
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Join Date: Mar 2005
Location: Houston
Posts: 3,619
Likes: 0
Received 0 Likes
on
0 Posts
11-14-2007, 09:23 PM
#29
Drifting
Join Date: Mar 2004
Location: Eville, IN
Posts: 2,372
Likes: 0
Received 0 Likes
on
0 Posts
11-14-2007, 09:59 PM
#30
