Can someone with PET....
#2
Looks like a 10x38
Take a look at pelicans diagrams. WHen you add the part to the cart you will get the bolt size if it is not already on the description.
http://www.pelicanparts.com/PartsLoo...-15-Frame3.htm
Take a look at pelicans diagrams. WHen you add the part to the cart you will get the bolt size if it is not already on the description.
http://www.pelicanparts.com/PartsLoo...-15-Frame3.htm
#4
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
OT My PET is corrupted. Anyone have a link or copy of PET? Rick Cannell had to take all that stuff off of his site, so we need to find an alternative soon.
BTW Michelle fast951 will know that off the top of his head, and so will special tool.
BTW Michelle fast951 will know that off the top of his head, and so will special tool.
Trending Topics
#8
Jane Bond 007
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Thread Starter
Looks like a 10x38
Take a look at pelicans diagrams. WHen you add the part to the cart you will get the bolt size if it is not already on the description.
http://www.pelicanparts.com/PartsLoo...-15-Frame3.htm
Take a look at pelicans diagrams. WHen you add the part to the cart you will get the bolt size if it is not already on the description.
http://www.pelicanparts.com/PartsLoo...-15-Frame3.htm
#9
Burning Brakes
Michelle, Just for confirmation tyro is on the money and it is available through your dealer for about $2. I happen to have every nut, bolt, washer, and seal for the two piece crossover in front of me now. If you need any other fastener specs let me know. I dropped over $200 for these bits at the dealer, not knowing the sizes, just to be safe.
Does anyone know the torque specs for all the bolts on the crossover pipe?
The shop manual had nothing specific.
Should I use the general M6=8Nm M8=20NM M10=40Nm?
Thanks, Jason
Does anyone know the torque specs for all the bolts on the crossover pipe?
The shop manual had nothing specific.
Should I use the general M6=8Nm M8=20NM M10=40Nm?
Thanks, Jason
#10
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
I had those bolts re-plated, but i changed the locking nuts with stainless ones (actually, i changed all the locking nuts to stainless steel).
PS: Lindsey is selling a set of those bolts (4) and nuts (3) for ~$7 or so...........
PS: Lindsey is selling a set of those bolts (4) and nuts (3) for ~$7 or so...........
#13
Burning Brakes
Join Date: May 2006
Location: Off the Autobahn.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts